Today's Message Index:
----------------------
1. 09:09 PM - Dwg 4 Error ( Left Elevator Assy - RV7 & RV8) (Garey Wittich)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Dwg 4 Error ( Left Elevator Assy - RV7 & RV8) |
Possibly wrong dimension shown: Lower right corner of Dwg 4 "Electric Trim Assy"
shows a dimension of - 3/8" Forward edge of EET-602B-L to forward edge of E-616PP:
The exposed "lip" on the E-615PP (Trim Access Plate) after being riveting
it to the Elev Skin is 3/8" wide. Thus the 3/8" dimension shown should be more
like 1/2". I noticed this problem AFTER drilling, dimpling and clecoing the
EET-602B-L & R to the Trim Cover Plate and trying to screw down the Trim Access
Plate (interference between the E615PP Reinforcing Plate and the EET-602B-L
& R occurred). Hope this helps somebody !!
Found the EET-602B-L & R were labeled wrong on the Parts = L should be R and R
should be L
Guess this ALL part of the learning curve - sure is frustrating.
Garey Santa Monica, CA
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|