RV8-List Digest Archive

Fri 05/08/09


Total Messages Posted: 5



Today's Message Index:
----------------------
 
     1. 05:04 AM - Re: Lights (koppk1)
     2. 08:15 AM - Re: Re: Lights (Jesse Laub)
     3. 09:55 AM - Re: Re: RV8-List Digest: Dynon & Transponders (Heath Cherneski)
     4. 11:35 AM - Re: Carpet Pattern Ideas For RV-8 Foot wells... (Steven DiNieri)
     5. 02:09 PM - RV10 Tail Kit for Sale (Larry Mersek)
 
 
 


Message 1


  • INDEX
  • Back to Main INDEX
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 05:04:08 AM PST US
    Subject: Re: Lights
    From: "koppk1" <kenneth.kopp@navy.mil>
    Thanks Matt but this isn't my first go round. I plans built a BD-4 awhile back (sold it to pay for the RV8). I'm using my brand new Xp-360 from the BD4 for the RV8 so that is covered along with most of the avionics. Luckily the sale of the BD mostly paid for the cost of the RV8 kit. As far as lights are concerned I've found several places that produce/sell automotive LED lighting systems for mere fractions of the cost of the aviation brands check this site out : http://www.superbrightleds.com/tail-brake-turn.html and I'd venture the road environment is much harsher than where we normally fly. I ordered several different bulbs and will test them out upon arrival. I'll post my results soonest. thanks! ken Read this topic online here: http://forums.matronics.com/viewtopic.php?p=243121#243121


    Message 2


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 08:15:46 AM PST US
    From: Jesse Laub <jesse@casco.net>
    Subject: Re: Lights
    I have a Vans "6 Lighting System" for sale. I'm parting out my RV8A project. It's complete except for the cables and connectors. My site is www.rv8projectparts.net to check them out. $700 I won't be able to reply for a few days, but can get back to you early next week. Jesse koppk1 wrote: > > Thanks Matt but this isn't my first go round. I plans built a BD-4 awhile back (sold it to pay for the RV8). I'm using my brand new Xp-360 from the BD4 for the RV8 so that is covered along with most of the avionics. Luckily the sale of the BD mostly paid for the cost of the RV8 kit. > > As far as lights are concerned I've found several places that produce/sell automotive LED lighting systems for mere fractions of the cost of the aviation brands check this site out : http://www.superbrightleds.com/tail-brake-turn.html and I'd venture the road environment is much harsher than where we normally fly. > > I ordered several different bulbs and will test them out upon arrival. > > I'll post my results soonest. thanks! > > ken > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=243121#243121 > > >


    Message 3


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 09:55:28 AM PST US
    From: "Heath Cherneski" <heath.cherneski@gmail.com>
    Subject: Re: RV8-List Digest: Dynon & Transponders
    Bill, I do not have the autopilot. Purchased my equipment before it was offered. I agree with your statement about dynon. I am currently working on a flight test program that will "plug in" to the existing dynon serial output and record flight information (flight and engine) for performing flight performance evaluation. I'm a big dynon fan! Good luck with your project. Blue skies Heath Cherneski heath.cherneski@gmail.com hchernes@utsi.edu heath.cherneski@us.army.mil _____ From: owner-rv8-list-server@matronics.com [mailto:owner-rv8-list-server@matronics.com] On Behalf Of japhillipsga@aol.com Sent: Thursday, May 07, 2009 11:56 AM Subject: Re: RV8-List: Re: RV8-List Digest: Dynon & Transponders Heath, thanks for the info. I'm not familiar with the 327, but I'll look it up. I have a KY 76 in my XL that I fly now that is not fancy, but serves the purpose. I'm going to install the cheapest transponder I can find in my 8a. The two Dynon system you have, do you have the AP system with is as well ? I think that is a great leap forward in glasss. I am waiting for my 0-360 and prop to arrive (early June) that I purchased through Vans at SnF so I'm making my shopping list for the panel. I think Dynon is the best pop for the buck. Thanks, Bill -----Original Message----- From: Heath Cherneski <heath.cherneski@gmail.com> Sent: Thu, 7 May 2009 11:46 am Subject: RE: RV8-List: Re: RV8-List Digest: Dynon & Transponders Bill, I have the d-100, d-120 combo and a garmin 327. works great. I think it will be a challenge to find a transponder that won't work with dynon stuff. garmin transponder is a great piece of equipment by the way and reasonably priced. Good luck Heath Cherneski <mailto:heath.cherneski@gmail.com> heath.cherneski@gmail.com <mailto:hchernes@utsi.edu> hchernes@utsi.edu <mailto:heath.cherneski@us.army.mil> heath.cherneski@us.army.mil _____ From: <mailto:owner-rv8-list-server@matronics.com> owner-rv8-list-server@matronics.com [ <mailto:owner-rv8-list-server@matronics.com?> mailto:owner-rv8-list-server@matronics.com] On Behalf Of <mailto:japhillipsga@aol.com> japhillipsga@aol.com Sent: Thursday, May 07, 2009 8:20 AM Subject: RV8-List: Re: RV8-List Digest: Dynon & Transponders Hello good folks, I am going to buy a transponder for my RV-8a. My concerns are that I plan to install a D100 & D120 with AP in my panel and I'm unsure which transponders are not compatible. Anybody know where I can find this out? Best regards, Bill of Georgia -----Original Message----- From: RV8-List Digest Server < <mailto:rv8-list@matronics.com> rv8-list@matronics.com> rv8-list-digest@matronics.com> Sent: Thu, 7 May 2009 2:58 am Subject: RV8-List Digest: 1 Msgs - 05/06/09 * Online Versions of Today's List Digest Archive Today's complete RV8-List Digest can also be found in either of the two Web Links listed below. The .html file includes the Digest formatted in HTML for viewing with a web browser and features Hyperlinked Indexes and Message Navigation. The .txt file includes the plain ASCII version of the RV8-List Digest and can be viewed with a generic text editor such as Notepad or with a web browser. HTML Version: <http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapte r 09-05-06&Archive=RV8> http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter 09-05-06&Archive=RV8 Text Version: <http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter 09-05-06&Archive=RV8> http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter 2009-05-06&Archive=RV8 ====================== EMail Version of Today's List Digest Archive ====================== ---------------------------------------------------------- RV8-List Digest Archive --- Total Messages Posted Wed 05/06/09: 1 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 08:54 PM - Carpet Pattern Ideas For RV-8 Foot wells... (Matt Dralle) ________________________________ Message 1 _____________________________________ Time: 08:54:46 PM PST US From: Matt Dralle < <mailto:dralle@matronics.com> dralle@matronics.com> Subject: RV8-List: Carpet Pattern Ideas For RV-8 Foot wells... Does anyone have some ideas and/or pictures of how they carpeted the passenger foot wells on their RV-8? Specifically how they integrated it with the cabin area carpet piece. I'm thinking of just a square hole cut out around the=2 0 parameter of the foot well, then adding some sort of insert into the foot well itself. That's a lot of weird angles, though. Thanks! Matt Dralle RV-8 #82880 Ah, Carpet Pattern Making... <http://www.matronics.com/Navigator?RV8-List> http://www.matronics.com/Navigator?RV8-List <http://forums.matronics.com/> http://forums.matronics.com <http://www.matronics.com/contribution> http://www.matronics.com/contribution =================================== get=_blank>http://www.matronics.com/Navigator?RV8-List =================================================== tp://forums.matronics.com =================================== _blank>http://www.matronics.com/contribution =================================== _____ http://www.matronics.com/contribution


    Message 4


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 11:35:32 AM PST US
    From: "Steven DiNieri" <capsteve@iflyrv10.com>
    Subject: Re: Carpet Pattern Ideas For RV-8 Foot wells...
    Matt, if you can get me a picture and some dimensions ( or templates) I'll make up a set. it may take a few tries, but I'd give you a free set when we're done for the effort. I don't have any access to an rv8, but I'd love to have a good set of templates around to offer for sale afterward.. steve iflyrv10.com -------------------------------------------------- From: "Matt Dralle" <dralle@matronics.com> Sent: Wednesday, May 06, 2009 11:53 PM Subject: RV8-List: Carpet Pattern Ideas For RV-8 Foot wells... > > > Does anyone have some ideas and/or pictures of how they carpeted the > passenger foot wells on their RV-8? Specifically how they integrated it > with the cabin area carpet piece. I'm thinking of just a square hole cut > out around the parameter of the foot well, then adding some sort of insert > into the foot well itself. That's a lot of weird angles, though. > > Thanks! > > Matt Dralle > RV-8 #82880 > Ah, Carpet Pattern Making... > > >


    Message 5


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 02:09:02 PM PST US
    From: "Larry Mersek" <1rv6flyer@internet49.com>
    Subject: RV10 Tail Kit for Sale
    I'm posting this for a local RV-6 pilot who is unable to complete his RV10 project. The project is located at Calaveras Airport San Andreas, CA. (KCPU) --Larry Mersek RV-6, flying RV10 Tail Kit for sale. Vertical and rudder are built. The horizontal is drilled to fit, dimpled, countersunk, and has been clecoed together before. It is ready for primer and priced at $2500. Marc at (209) 609-1947. fieldbaren@volcano.net




    Other Matronics Email List Services

  • Post A New Message
  •   rv8-list@matronics.com
  • UN/SUBSCRIBE
  •   http://www.matronics.com/subscription
  • List FAQ
  •   http://www.matronics.com/FAQ/RV8-List.htm
  • Web Forum Interface To Lists
  •   http://forums.matronics.com
  • Matronics List Wiki
  •   http://wiki.matronics.com
  • 7-Day List Browse
  •   http://www.matronics.com/browse/rv8-list
  • Browse RV8-List Digests
  •   http://www.matronics.com/digest/rv8-list
  • Browse Other Lists
  •   http://www.matronics.com/browse
  • Live Online Chat!
  •   http://www.matronics.com/chat
  • Archive Downloading
  •   http://www.matronics.com/archives
  • Photo Share
  •   http://www.matronics.com/photoshare
  • Other Email Lists
  •   http://www.matronics.com/emaillists
  • Contributions
  •   http://www.matronics.com/contribution

    These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.

    -- Please support this service by making your Contribution today! --