Today's Message Index:
----------------------
1. 08:49 AM - Re: RV8-List McCalley Governor Screws... (Matt Dralle)
2. 08:11 PM - Oil Cooler Size On RV-10...? (Matt Dralle)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: RV8-List McCalley Governor Screws... |
I pulled one of the screws out to have a closer look, and it appears that on the
McCalley governor they've used a dab of Green locktite on the shaft of the screw.
There's defiantly no safety wire holes in the screws. Does Green Locktite
seem sufficient?
Matt
At 07:35 AM 8/19/2009 Wednesday, Speedy11@aol.com wrote:
>Yes, they need to be safety wired. Contact the manufacturer and check to see
if the screw heads should have been drilled.
>Stan
>I noticed that your Allen head screws are drilled for safety wire. Mine aren't.
>I wonder if I'm still suppose to safety wire them...?
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Oil Cooler Size On RV-10...? |
Hey, what size oil cooler to the RV-10's use? Is it the same on on the -7's and
-8's? "Oil Cooler II". Or, do they use a larger one?
I've got a SW10610R for my IO-390 on the RV-8 which is a monster sized cooler.
The stock "FF-709" mounting bracket is way too small. Does Van's have a larger
one available? What's used on the RV-10?
I guess that I could make one, but I'd rather Van's CNC punch did, if you know
what I mean...?
Thanks!
Matt Dralle
RV-8 #82880 N998RV
http://www.mykitlog.com/dralle
FWF
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|