Today's Message Index:
----------------------
1. 12:10 PM - Photos Of CS Prop Bolt Safety Wiring...? (Matt Dralle)
2. 03:33 PM - Re: Photos Of CS Prop Bolt Safety Wiring...? (Matt Dralle)
3. 03:59 PM - Re: Photos Of CS Prop Bolt Safety Wiring...? (Blake Lewis)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Photos Of CS Prop Bolt Safety Wiring...? |
Does anyone have any close-up photos of how they safety wired the prop bolts on
a Hartzell CS prop? You have to run the safety wire though those roll-pins.
What a pain. If you have to pull the torque up from the bottom, it seems impossible
to actually set twist. Maybe if I twist both ends first... Hum...
Anyway, some pics would be most appreciated!
Matt Dralle
RV-8 #82880 N998RV
http://www.mattsrv8.com - Matt's RV-8 Construction Blog
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Photos Of CS Prop Bolt Safety Wiring...? |
At 12:08 PM 2/28/2010 Sunday, Matt Dralle wrote:
>Does anyone have any close-up photos of how they safety wired the prop bolts on
a Hartzell CS prop? You have to run the safety wire though those roll-pins.
What a pain. If you have to pull the torque up from the bottom, it seems impossible
to actually set twist. Maybe if I twist both ends first... Hum...
>
>Anyway, some pics would be most appreciated!
>
>Matt Dralle
Well, okay, so it wasn't quite as hard as I thought. It was still a pain though!
Here are three pictures of the safety wiring I did on the Hartzell CS Prop
bolts (photo of each pair of bolts). What do you guys think?
Best regards,
Matt Dralle
RV-8 #82880 N998RV
http://www.mattsrv8.com - Matt's RV-8 Construction Blog
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Photos Of CS Prop Bolt Safety Wiring...? |
Matt,
I watched a mechanic do this last Thursday. Well I didn't watch the
whole time because it took him forever. He was complaining an hour after he
was done.
I didn't take pics.
Blake.
Does anyone have any close-up photos of how they safety wired the prop bolts
> on a Hartzell CS prop? You have to run the safety wire though those
> roll-pins. What a pain. If you have to pull the torque up from the bottom,
> it seems impossible to actually set twist. Maybe if I twist both ends
> first... Hum...
>
> Anyway, some pics would be most appreciated!
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|