Today's Message Index:
----------------------
1. 11:50 AM - Re: Fuel Tanks TestingII (Dan Bergeron)
2. 08:55 PM - Re: Fuel Tanks TestingIII (japhillipsga@aol.com)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Fuel Tanks TestingII |
BILL:
VANS HAS A KIT WHICH ALLOWS YOU TO PRESSURE TEST YOUR TANKS WITH COMPRESSED
AIR. I USED IT AFTER FINISHING UP MY TANKS SEVERAL YEARS AGO - IT'S
CLASSIC VANS - ECONOMICAL AND SIMPLE AND IT WORKS. YOU SIMPLY MAKE SURE THE
FILLER CAPS ARE NICE AND TIGHT; SCREW A NIPPLE INTO THE VENT LINE FITTING
AND TAPE A BALLOON OVER IT; SCREW AN AIR VALVE INTO THE FUEL LINE FITTING
AND PUMP SOME AIR INTO THE TANK WITH A BICYCLE PUMP - DO NOT USE AN AIR
COMPRESSOR. THE BALLOON WILL EXPAND AND KEEP YOU FROM OVER PRESSURISING THE
TANK. DISCONNECT THE PUMP AND WATCH THE BALLOON. I ALSO BRUSHED SOAPY
WATER ONTO ALL THE RIVET LINES. IF THE BALLOON STAYS INFLATED AND YOU DON'T
SEE ANY BUBBLES - YOU'RE HOME FREE. SURE BEATS FOOLING AROUND WITH 21
GALLONS OF GASOLINE - AVGAS OR MOGAS. I'VE NEVER HAD A LEAK.
DAN BERGERON
RV-7A - N307TB
152 HOURS SINCE FIRST
FLIGHT ON 08/04/09
On Wed, Jun 23, 2010 at 9:59 PM, <japhillipsga@aol.com> wrote:
> We have and so does everybody else, but somehow a percentage still have
> leaks to contend with when the juice goes in so why not fluid test before
> mounting?
> do not archive
>
>
> -----Original Message-----
> From: rikvincent@aol.com
> To: rv8-list@matronics.com
> Sent: Wed, Jun 23, 2010 3:09 pm
> Subject: Re: RV8-List: Fuel Tanks Testing
>
> Why not pressure test with air?
>
>
> -----Original Message-----
> From: japhillipsga@aol.com
> To: rv8-list@matronics.com
> Sent: Wed, Jun 23, 2010 6:39 am
> Subject: RV8-List: Fuel Tanks Testing
>
> We are planning on a full up test of the RV-8 tanks before final mounting.
> Instead of 21 gallons of 100 LL we were thinking maybe just premium mogas.
> Will mogas be a suitable substitute for AV gas? Will it show a leak as well
> as 100 LL ? We know water viscosity is too great, but mogas it available,
> easier. What does the smart folks think?, Best regards, Bill
>
>
> *
>
> ===================================
> //www.matronics.com/Navigator?RV8-List">http://www.matronics.com/Navigator?RV8-List
> ===================================
> //forums.matronics.com">http://forums.matronics.com
> ===================================
> //www.matronics.com/contribution">http://www.matronics.com/contribution
> ===================================
> *
>
> *
>
> ===================================
> get=_blank>http://www.matronics.com/Navigator?RV8-List
> ===================================
> tp://forums.matronics.com
> ===================================
> _blank>http://www.matronics.com/contribution
> ===================================
> *
>
> *
>
> *
>
>
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Fuel Tanks TestingIII |
Thanks Dan, as I indicted before we did the balloon test several years ago
, but we also know of several fellows that were successful at that test an
d had leaks when gas went in the tank later. Before I spend a bunch of mo
ney on painting and time and effort I want assurance the paint won't be ru
ined by a leak. So who knows can we expect Mogas to move through a leak as
100 LL ? Who knows? Bill
-----Original Message-----
From: Dan Bergeron <dan.pat.b@gmail.com>
Sent: Thu, Jun 24, 2010 2:41 pm
Subject: Re: RV8-List: Fuel Tanks TestingII
BILL:
VANS HAS A KIT WHICH ALLOWS YOU TO PRESSURE TEST YOUR TANKS WITH COMPRESSE
D AIR. I USED IT AFTER FINISHING UP MY TANKS SEVERAL YEARS AGO - IT'S CL
ASSIC VANS - ECONOMICAL AND SIMPLE AND IT WORKS. YOU SIMPLY MAKE SURE THE
FILLER CAPS ARE NICE AND TIGHT; SCREW A NIPPLE INTO THE VENT LINE FITTING
AND TAPE A BALLOON OVER IT; SCREW AN AIR VALVE INTO THE FUEL LINE FITTING
AND PUMP SOME AIR INTO THE TANK WITH A BICYCLE PUMP - DO NOT USE AN AIR
COMPRESSOR. THE BALLOON WILL EXPAND AND KEEP YOU FROM OVER PRESSURISING
THE TANK. DISCONNECT THE PUMP AND WATCH THE BALLOON. I ALSO BRUSHED SOA
PY WATER ONTO ALL THE RIVET LINES. IF THE BALLOON STAYS INFLATED AND YOU
DON'T SEE ANY BUBBLES - YOU'RE HOME FREE. SURE BEATS FOOLING AROUND WITH
21 GALLONS OF GASOLINE - AVGAS OR MOGAS. I'VE NEVER HAD A LEAK.
DAN BERGERON
RV-7A - N307TB
152 HOURS SINCE FIRST
FLIGHT ON 08/04/09
On Wed, Jun 23, 2010 at 9:59 PM, <japhillipsga@aol.com> wrote:
We have and so does everybody else, but somehow a percentage still have le
aks to contend with when the juice goes in so why not fluid test before mo
unting?
do not archive
-----Original Message-----
From: rikvincent@aol.com
Sent: Wed, Jun 23, 2010 3:09 pm
Subject: Re: RV8-List: Fuel Tanks Testing
Why not pressure test with air?
-----Original Message-----
From: japhillipsga@aol.com
Sent: Wed, Jun 23, 2010 6:39 am
Subject: RV8-List: Fuel Tanks Testing
We are planning on a full up test of the RV-8 tanks before final mounting.
Instead of 21 gallons of 100 LL we were thinking maybe just premium mogas
. Will mogas be a suitable substitute for AV gas? Will it show a leak as
well as 100 LL ? We know water viscosity is too great, but mogas it avail
able, easier. What does the smart folks think?, Best regards, Bill
//www.matronics.com/Navigator?RV8-List">http://www.matronics.com/Navigator
?RV8-List
/forums.matronics.com">http://forums.matronics.com
/www.matronics.com/contribution">http://www.matronics.com/contribution
get=_blank>http://www.matronics.com/Navigator?RV8-List
p://forums.matronics.com
blank>http://www.matronics.com/contribution
et="_blank">http://www.matronics.com/Navigator?RV8-List
p://forums.matronics.com
blank">http://www.matronics.com/contribution
========================
===========
-= - The RV8-List Email Forum -
-= Use the Matronics List Features Navigator to browse
-= the many List utilities such as List Un/Subscription,
-= Archive Search & Download, 7-Day Browse, Chat, FAQ,
-= Photoshare, and much much more:
-
-= --> http://www.matronics.com/Navigator?RV8-List
-
-========================
========================
===========
-= - MATRONICS WEB FORUMS -
-= Same great content also available via the Web Forums!
-
-= --> http://forums.matronics.com
-
-========================
========================
===========
-= - List Contribution Web Site -
-= Thank you for your generous support!
-= -Matt Dralle, List Admin.
-= --> http://www.matronics.com/contribution
-========================
========================
===========
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|