Today's Message Index:
----------------------
1. 01:04 AM - Re: Re: RV8 jacking point (John Ciolino)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: RV8 jacking point |
Rich,
My limited imagination is keeping me from picturing this. Any pics
available?
John Ciolino
RV-8
-----Original Message-----
From: owner-rv8-list-server@matronics.com
[mailto:owner-rv8-list-server@matronics.com] On Behalf Of Rich Crosley
Sent: Thursday, July 01, 2010 9:03 AM
Subject: RV8-List: Re: RV8 jacking point
I also used the Harbor Freight tall jack, but never liked the idea of using
the wing as a jack point. Just remove the small plate that covers the gear
to fuselage attach point, use two short pieces of angle iron and a bolt to
modify the jack, and you have a solid point to jack from. No concern about
damaging the wing or motor mount, and you don't have to remove the cowl.
Rich Crosley
RV8 N948RC
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|