Today's Message Index:
----------------------
1. 08:24 AM - Re: RV-8 Roll Bar Mirrors (Heath Cherneski)
2. 09:10 AM - Re: RV-8 Roll Bar Mirrors (Robin Marks)
3. 10:13 AM - Routing Wires around the Center Spar (MLWynn@aol.com)
4. 12:56 PM - Re: RV-8 Roll Bar Mirrors (Robin Marks)
5. 04:01 PM - Re: RV-8 Roll Bar Mirrors (Heath Cherneski)
6. 04:25 PM - Re: RV-8 Roll Bar Mirrors (Robin Marks)
7. 05:14 PM - New Aviation TV Show (Robin Marks)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | RV-8 Roll Bar Mirrors |
Robin,
I found great mirrors at O'Rielly Autoparts. They are convex and work
perfectly.
Heath Cherneski
N818HC 100+ hours and still smiling
_____
From: owner-rv8-list-server@matronics.com
[mailto:owner-rv8-list-server@matronics.com] On Behalf Of Robin Marks
Sent: Friday, October 22, 2010 6:20 PM
Subject: RV8-List: RV-8 Roll Bar Mirrors
I am to the point where we are mounting the roll bar on our 8A. I wanted to
add two "Check 6" mirrors on the roll bar as I have seen in a couple of
other builds. One build in particular had some nice mildly curved mirrors
that look as if they were made for that spot. Can anyone point me in the
right direction to source these mirrors?
Thanks,
Robin
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | RV-8 Roll Bar Mirrors |
Heath,
Thanks are these the ones you got?
http://www.oreillyauto.com/site/c/detail/CIP0/49702.oap?keyword=mirror&pt
=N0342&ppt=C0092
[image: CIPA - Wedge Convex]
*From:* owner-rv8-list-server@matronics.com [mailto:
owner-rv8-list-server@matronics.com] *On Behalf Of *Heath Cherneski
*Sent:* Saturday, October 23, 2010 8:17 AM
*To:* rv8-list@matronics.com
*Subject:* RE: RV8-List: RV-8 Roll Bar Mirrors
Robin,
I found great mirrors at O=92Rielly Autoparts. They are convex and work
perfectly.
Heath Cherneski
N818HC 100+ hours and still smiling
------------------------------
*From:* owner-rv8-list-server@matronics.com [mailto:
owner-rv8-list-server@matronics.com] *On Behalf Of *Robin Marks
*Sent:* Friday, October 22, 2010 6:20 PM
*To:* rv8-list@matronics.com
*Subject:* RV8-List: RV-8 Roll Bar Mirrors
I am to the point where we are mounting the roll bar on our 8A. I wanted to
add two =93Check 6=94 mirrors on the roll bar as I have seen in a couple of
other builds. One build in particular had some nice mildly curved mirrors
that look as if they were made for that spot. Can anyone point me in the
right direction to source these mirrors?
Thanks,
Robin
* *
* *
*http://www.matronics.com/Navigator?RV8-List*
* *
*http://forums.matronics.com*
* *
*http://www.matronics.com/contribution*
* *
* *
* *
===========*
===========*
===========*
===========*
* *
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Routing Wires around the Center Spar |
Hi all,
I am busy wiring. In looking how to get the wires through and around the
center spar, there are four pre-drilled holes. On the right, the outside
hole is close enough to the right console that they should be pretty easy to
hide/keep out of harm's way. On the inner hole, not so much. On the
left, they exit near the fuel selector and associated plumbing. How has
everyone routed this stuff to keep it out of sight and away from abrasion?
Regards,
Michael Wynn
RV 8 Finishing
San Ramon, CA
Message 4
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | RV-8 Roll Bar Mirrors |
After looking online I went to my local auto parts store and they had been
purchased by O=92Rielly. 3 minutes later I was walking out with what seems
to
be pretty good choices for these mirrors. Thanks Heath!
Robin
*From:* owner-rv8-list-server@matronics.com [mailto:
owner-rv8-list-server@matronics.com] *On Behalf Of *Heath Cherneski
*Sent:* Saturday, October 23, 2010 8:17 AM
*To:* rv8-list@matronics.com
*Subject:* RE: RV8-List: RV-8 Roll Bar Mirrors
Robin,
I found great mirrors at O=92Rielly Autoparts. They are convex and work
perfectly.
Heath Cherneski
N818HC 100+ hours and still smiling
------------------------------
*From:* owner-rv8-list-server@matronics.com [mailto:
owner-rv8-list-server@matronics.com] *On Behalf Of *Robin Marks
*Sent:* Friday, October 22, 2010 6:20 PM
*To:* rv8-list@matronics.com
*Subject:* RV8-List: RV-8 Roll Bar Mirrors
I am to the point where we are mounting the roll bar on our 8A. I wanted to
add two =93Check 6=94 mirrors on the roll bar as I have seen in a couple of
other builds. One build in particular had some nice mildly curved mirrors
that look as if they were made for that spot. Can anyone point me in the
right direction to source these mirrors?
Thanks,
Robin
* *
* *
*http://www.matronics.com/Navigator?RV8-List*
* *
*http://forums.matronics.com*
* *
*http://www.matronics.com/contribution*
* *
* *
* *
===========*
===========*
===========*
===========*
* *
Message 5
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | RV-8 Roll Bar Mirrors |
Those are the ones. I used the self-adhesive to try them out (position and
angle, etc.) I plan on screwing a flat piece of aluminum to the roll bar
and attaching them with Velcro eventually, but every time I go to the hanger
I find an excuse to fly instead of working on the airplane. I'll try to
post pictures when I actually get final solution.
Cheers
heath
_____
From: owner-rv8-list-server@matronics.com
[mailto:owner-rv8-list-server@matronics.com] On Behalf Of Robin Marks
Sent: Saturday, October 23, 2010 11:07 AM
Subject: RE: RV8-List: RV-8 Roll Bar Mirrors
Heath,
Thanks are these the ones you got?
http://www.oreillyauto.com/site/c/detail/CIP0/49702.oap?keyword=mirror
<http://www.oreillyauto.com/site/c/detail/CIP0/49702.oap?keyword=mirror&pt=N
0342&ppt=C0092> &pt=N0342&ppt=C0092
CIPA - Wedge Convex
From: owner-rv8-list-server@matronics.com
[mailto:owner-rv8-list-server@matronics.com] On Behalf Of Heath Cherneski
Sent: Saturday, October 23, 2010 8:17 AM
Subject: RE: RV8-List: RV-8 Roll Bar Mirrors
Robin,
I found great mirrors at O'Rielly Autoparts. They are convex and work
perfectly.
Heath Cherneski
N818HC 100+ hours and still smiling
_____
From: owner-rv8-list-server@matronics.com
[mailto:owner-rv8-list-server@matronics.com] On Behalf Of Robin Marks
Sent: Friday, October 22, 2010 6:20 PM
Subject: RV8-List: RV-8 Roll Bar Mirrors
I am to the point where we are mounting the roll bar on our 8A. I wanted to
add two "Check 6" mirrors on the roll bar as I have seen in a couple of
other builds. One build in particular had some nice mildly curved mirrors
that look as if they were made for that spot. Can anyone point me in the
right direction to source these mirrors?
Thanks,
Robin
http://www.matronics.com/Navigator?RV8-List
http://forums.matronics.com
http://www.matronics.com/contribution
= the many List utilities such as List Un/Subscription,
matronics.com/Navigator?RV8-List">http://www.matronics.com/Navigator?RV8-Lis
t
================
<http://forums.matronics.com> http://forums.matronics.com
================
-Matt Dralle, List Admin.
Message 6
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | RV-8 Roll Bar Mirrors |
I just chromed my roll bar so no screwing things into it for a while. I pla
n
to stick mine on with 3M dual lock and decide if I even want the mirrors on
the plane. I have some extra pieces if you want. (approximately 30,000 extr
a
pieces)
R
*From:* owner-rv8-list-server@matronics.com [mailto:
owner-rv8-list-server@matronics.com] *On Behalf Of *Heath Cherneski
*Sent:* Saturday, October 23, 2010 3:56 PM
*To:* rv8-list@matronics.com
*Subject:* RE: RV8-List: RV-8 Roll Bar Mirrors
Those are the ones. I used the self-adhesive to try them out (position and
angle, etc.) I plan on screwing a flat piece of aluminum to the roll bar
and attaching them with Velcro eventually, but every time I go to the hange
r
I find an excuse to fly instead of working on the airplane. I=92ll try to
post pictures when I actually get final solution.
Cheers
heath
------------------------------
*From:* owner-rv8-list-server@matronics.com [mailto:
owner-rv8-list-server@matronics.com] *On Behalf Of *Robin Marks
*Sent:* Saturday, October 23, 2010 11:07 AM
*To:* rv8-list@matronics.com
*Subject:* RE: RV8-List: RV-8 Roll Bar Mirrors
Heath,
Thanks are these the ones you got?
http://www.oreillyauto.com/site/c/detail/CIP0/49702.oap?keyword=mirror&pt
=N0342&ppt=C0092
[image: CIPA - Wedge Convex]
*From:* owner-rv8-list-server@matronics.com [mailto:
owner-rv8-list-server@matronics.com] *On Behalf Of *Heath Cherneski
*Sent:* Saturday, October 23, 2010 8:17 AM
*To:* rv8-list@matronics.com
*Subject:* RE: RV8-List: RV-8 Roll Bar Mirrors
Robin,
I found great mirrors at O=92Rielly Autoparts. They are convex and work
perfectly.
Heath Cherneski
N818HC 100+ hours and still smiling
------------------------------
*From:* owner-rv8-list-server@matronics.com [mailto:
owner-rv8-list-server@matronics.com] *On Behalf Of *Robin Marks
*Sent:* Friday, October 22, 2010 6:20 PM
*To:* rv8-list@matronics.com
*Subject:* RV8-List: RV-8 Roll Bar Mirrors
I am to the point where we are mounting the roll bar on our 8A. I wanted to
add two =93Check 6=94 mirrors on the roll bar as I have seen in a couple of
other builds. One build in particular had some nice mildly curved mirrors
that look as if they were made for that spot. Can anyone point me in the
right direction to source these mirrors?
Thanks,
Robin
* *
* *
*http://www.matronics.com/Navigator?RV8-List*
* *
*http://forums.matronics.com*
* *
*http://www.matronics.com/contribution*
* *
* *
* *
= the many List utilities such as List Un/Subscription,
matronics.com/Navigator?RV8-List">
http://www.matronics.com/Navigator?RV8-List
================
<b - MATRONICS WEB FORUMS
->http://forums.matronics.com<http://forums.matronics.com>
================
-Matt Dralle, List Admin.
Message 7
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | New Aviation TV Show |
Just came across this TV show on DirecTV. First show featured SNF.
http://www.theaviators.tv/TheAviators.TV_-_Home.html
Darn, now I want to build one of these. Noooooooooooooooo:
http://aircam.com/gallery/
Robin
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|