Today's Message Index:
----------------------
1. 05:24 AM - Glare Shield Edge (John Long)
2. 05:40 AM - Re: Glare Shield Edge (Hotmail)
3. 06:41 AM - Re: Glare Shield Edge (Craig Gallenbach)
4. 09:38 AM - Re: Glare Shield Edge (Allan Grajek)
5. 10:09 AM - Re: Glare Shield Edge (trc)
6. 12:31 PM - Re: Glare Shield Edge (Vince Himsl)
7. 01:37 PM - Re: Spam:********, Re: Glare Shield Edge (Curtis White)
8. 01:48 PM - Re: Spam:********, Re: Glare Shield Edge (Larry Bowen)
9. 03:24 PM - Re: Glare Shield Edge ()
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Glare Shield Edge |
I am getting close to finish. a couple of months ago I saw some edging for
the glare shield on one of the websites. When I went back to order it, I
could not find it again.
If I was in an accident and went into the instrument panel, the glare shield
would take the top of my head off from just above my eyes. What have people
done about the meat cleaver that the edge of the glare shield would be in an
accident?
John
N470MJ
At the airport, & almost there.
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Glare Shield Edge |
Wear your shoulder Barnard, problem solved.
Sent from my iPad
On Apr 10, 2011, at 7:20 AM, John Long <johnlong63@gmail.com> wrote:
> I am getting close to finish. a couple of months ago I saw some edging fo
r the glare shield on one of the websites. When I went back to order it, I c
ould not find it again.
>
> If I was in an accident and went into the instrument panel, the glare shie
ld would take the top of my head off from just above my eyes. What have peo
ple done about the meat cleaver that the edge of the glare shield would be i
n an accident?
>
> John
> N470MJ
> At the airport, & almost there.
>
>
==========================
=========
==========================
=========
==========================
=========
==========================
=========
>
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Glare Shield Edge |
I used the glare shield welt from Classic Aero Designs. -It fits well, go
es on easily, and looks good. -
Craig GallenbachRV8A Eastover, NC 185hrs
--- On Sun, 4/10/11, John Long <johnlong63@gmail.com> wrote:
From: John Long <johnlong63@gmail.com>
Subject: RV8-List: Glare Shield Edge
I am getting close to finish.- a couple of months ago I saw some edging f
or the glare shield on one of the websites.- When I went back to order it
, I could not find it again.=0A-=0AIf I was in an accident and went into
the instrument panel, the glare shield would take the top of my head off fr
om just above my eyes.- What have people done about the meat cleaver that
the edge of the glare shield would be in an accident?- =0A=0A-=0AJohn
=======0A=0A
Message 4
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Glare Shield Edge |
Just answer the question
Al grajek
On Apr 10, 2011, at 8:35, Hotmail <rv8n222bc@hotmail.com> wrote:
> Wear your shoulder Barnard, problem solved.
>
> Sent from my iPad
>
> On Apr 10, 2011, at 7:20 AM, John Long <johnlong63@gmail.com> wrote:
>
>> I am getting close to finish. a couple of months ago I saw some edging f
or the glare shield on one of the websites. When I went back to order it, I
could not find it again.
>>
>> If I was in an accident and went into the instrument panel, the glare shi
eld would take the top of my head off from just above my eyes. What have pe
ople done about the meat cleaver that the edge of the glare shield would be i
n an accident?
>>
>> John
>> N470MJ
>> At the airport, & almost there.
>>
>>
>>
>
>
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
>
Message 5
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Glare Shield Edge |
Heavy wall 3/4 inch rubber tubing......slit. glued. riveted at ends. A little
black paint to match top of glareshield
Allan Grajek <algrajek@msn.com> wrote:
>Just answer the question
>
>Al grajek
>
>
>On Apr 10, 2011, at 8:35, Hotmail <rv8n222bc@hotmail.com> wrote:
>
>> Wear your shoulder Barnard, problem solved.
>>
>> Sent from my iPad
>>
>> On Apr 10, 2011, at 7:20 AM, John Long <johnlong63@gmail.com> wrote:
>>
>>> I am getting close to finish. a couple of months ago I saw some edging for
the glare shield on one of the websites. When I went back to order it, I could
not find it again.
>>>
>>> If I was in an accident and went into the instrument panel, the glare shield
would take the top of my head off from just above my eyes. What have people
done about the meat cleaver that the edge of the glare shield would be in an
accident?
>>>
>>> John
>>> N470MJ
>>> At the airport, & almost there.
>>>
>>>
>>>
>>
>>
>3D============================================
>3D============================================
>3D============================================
>3D============================================
>>
Message 6
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Glare Shield Edge |
West marine sells pinch edging. I went hdepot, bought 1/2" flex blue plastic
pipe and then 1/2" black foam pipe insulation. Total = @6.00. good enough
until u have better solution.
Vince H.
N8432 - 82 hrs
Sent from my iPod
On Apr 10, 2011, at 5:20 AM, John Long <johnlong63@gmail.com> wrote:
> I am getting close to finish. a couple of months ago I saw some edging fo
r the glare shield on one of the websites. When I went back to order it, I c
ould not find it again.
>
> If I was in an accident and went into the instrument panel, the glare shie
ld would take the top of my head off from just above my eyes. What have peo
ple done about the meat cleaver that the edge of the glare shield would be i
n an accident?
>
> John
> N470MJ
> At the airport, & almost there.
>
>
==========================
=========
==========================
=========
==========================
=========
==========================
=========
>
Message 7
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Glare Shield Edge |
For a little more professional look. Google "piping". That's what it's
called. You can buy in different lengths. Put some L1300 glue on it or any
very good adhesive and you've got a great look and a safe edge.
CRW in STT
----- Original Message -----
From: "trc" <funflyer1959@yahoo.com>
Sent: Sunday, April 10, 2011 12:07 PM
Subject: Spam:********, Re: RV8-List: Glare Shield Edge
>
> Heavy wall 3/4 inch rubber tubing......slit. glued. riveted at ends. A
> little black paint to match top of glareshield
>
> Allan Grajek <algrajek@msn.com> wrote:
>
>>Just answer the question
>>
>>Al grajek
>>
>>
>>On Apr 10, 2011, at 8:35, Hotmail <rv8n222bc@hotmail.com> wrote:
>>
>>> Wear your shoulder Barnard, problem solved.
>>>
>>> Sent from my iPad
>>>
>>> On Apr 10, 2011, at 7:20 AM, John Long <johnlong63@gmail.com> wrote:
>>>
>>>> I am getting close to finish. a couple of months ago I saw some edging
>>>> for the glare shield on one of the websites. When I went back to order
>>>> it, I could not find it again.
>>>>
>>>> If I was in an accident and went into the instrument panel, the glare
>>>> shield would take the top of my head off from just above my eyes. What
>>>> have people done about the meat cleaver that the edge of the glare
>>>> shield would be in an accident?
>>>>
>>>> John
>>>> N470MJ
>>>> At the airport, & almost there.
>>>>
>>>>
>>>>
>>>
>>>
>>3D============================================
>>3D============================================
>>3D============================================
>>3D============================================
>>>
>
>
>
Message 8
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Glare Shield Edge |
I used this stuff from Cleaveland Tool on my 8 and liked it. It's sort of
minimal looking compared to Classic Aero, but sometimes thats a good thing.
http://www.cleavelandtoolstore.com/prodinfo.asp?number=GSE54
<http://www.cleavelandtoolstore.com/prodinfo.asp?number=GSE54>
--
Larry Bowen
Larry@BowenAero.com
http://BowenAero.com
On Sun, Apr 10, 2011 at 5:31 PM, Curtis White <curtiswhite@vipowernet.net>wrote:
> >
>
> For a little more professional look. Google "piping". That's what it's
> called. You can buy in different lengths. Put some L1300 glue on it or any
> very good adhesive and you've got a great look and a safe edge.
> CRW in STT
> ----- Original Message ----- From: "trc" <funflyer1959@yahoo.com>
> To: <rv8-list@matronics.com>
> Sent: Sunday, April 10, 2011 12:07 PM
> Subject: Spam:********, Re: RV8-List: Glare Shield Edge
>
>
>>
>> Heavy wall 3/4 inch rubber tubing......slit. glued. riveted at ends. A
>> little black paint to match top of glareshield
>>
>> Allan Grajek <algrajek@msn.com> wrote:
>>
>> Just answer the question
>>>
>>> Al grajek
>>>
>>>
>>> On Apr 10, 2011, at 8:35, Hotmail <rv8n222bc@hotmail.com> wrote:
>>>
>>> Wear your shoulder Barnard, problem solved.
>>>>
>>>> Sent from my iPad
>>>>
>>>> On Apr 10, 2011, at 7:20 AM, John Long <johnlong63@gmail.com> wrote:
>>>>
>>>> I am getting close to finish. a couple of months ago I saw some edging
>>>>> for the glare shield on one of the websites. When I went back to order it,
>>>>> I could not find it again.
>>>>>
>>>>> If I was in an accident and went into the instrument panel, the glare
>>>>> shield would take the top of my head off from just above my eyes. What have
>>>>> people done about the meat cleaver that the edge of the glare shield would
>>>>> be in an accident?
>>>>>
>>>>> John
>>>>> N470MJ
>>>>> At the airport, & almost there.
>>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>> 3D============================================
>>>
>>> 3D============================================
>>>
>>> 3D============================================
>>>
>>> 3D============================================
>>>
>>>>
>>>>
>>
>>
>>
>>
>>
>>
>
>
Message 9
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Glare Shield Edge |
I took a length of 3/8 aluminum tubing and split it. It would stay in place by
its self but I glued it down and painted.
Louis RV-8 This Year.
---- John Long <johnlong63@gmail.com> wrote:
> I am getting close to finish. a couple of months ago I saw some edging for
> the glare shield on one of the websites. When I went back to order it, I
> could not find it again.
>
> If I was in an accident and went into the instrument panel, the glare shield
> would take the top of my head off from just above my eyes. What have people
> done about the meat cleaver that the edge of the glare shield would be in an
> accident?
>
> John
> N470MJ
> At the airport, & almost there.
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|