---------------------------------------------------------- RV8-List Digest Archive --- Total Messages Posted Sun 04/10/11: 9 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 05:24 AM - Glare Shield Edge (John Long) 2. 05:40 AM - Re: Glare Shield Edge (Hotmail) 3. 06:41 AM - Re: Glare Shield Edge (Craig Gallenbach) 4. 09:38 AM - Re: Glare Shield Edge (Allan Grajek) 5. 10:09 AM - Re: Glare Shield Edge (trc) 6. 12:31 PM - Re: Glare Shield Edge (Vince Himsl) 7. 01:37 PM - Re: Spam:********, Re: Glare Shield Edge (Curtis White) 8. 01:48 PM - Re: Spam:********, Re: Glare Shield Edge (Larry Bowen) 9. 03:24 PM - Re: Glare Shield Edge () ________________________________ Message 1 _____________________________________ Time: 05:24:36 AM PST US Subject: RV8-List: Glare Shield Edge From: John Long I am getting close to finish. a couple of months ago I saw some edging for the glare shield on one of the websites. When I went back to order it, I could not find it again. If I was in an accident and went into the instrument panel, the glare shield would take the top of my head off from just above my eyes. What have people done about the meat cleaver that the edge of the glare shield would be in an accident? John N470MJ At the airport, & almost there. ________________________________ Message 2 _____________________________________ Time: 05:40:32 AM PST US Subject: Re: RV8-List: Glare Shield Edge From: Hotmail Wear your shoulder Barnard, problem solved. Sent from my iPad On Apr 10, 2011, at 7:20 AM, John Long wrote: > I am getting close to finish. a couple of months ago I saw some edging fo r the glare shield on one of the websites. When I went back to order it, I c ould not find it again. > > If I was in an accident and went into the instrument panel, the glare shie ld would take the top of my head off from just above my eyes. What have peo ple done about the meat cleaver that the edge of the glare shield would be i n an accident? > > John > N470MJ > At the airport, & almost there. > > ========================== ========= ========================== ========= ========================== ========= ========================== ========= > ________________________________ Message 3 _____________________________________ Time: 06:41:14 AM PST US From: Craig Gallenbach Subject: Re: RV8-List: Glare Shield Edge I used the glare shield welt from Classic Aero Designs. -It fits well, go es on easily, and looks good. - Craig GallenbachRV8A Eastover, NC 185hrs --- On Sun, 4/10/11, John Long wrote: From: John Long Subject: RV8-List: Glare Shield Edge I am getting close to finish.- a couple of months ago I saw some edging f or the glare shield on one of the websites.- When I went back to order it , I could not find it again.=0A-=0AIf I was in an accident and went into the instrument panel, the glare shield would take the top of my head off fr om just above my eyes.- What have people done about the meat cleaver that the edge of the glare shield would be in an accident?- =0A=0A-=0AJohn =======0A=0A ________________________________ Message 4 _____________________________________ Time: 09:38:58 AM PST US Subject: Re: RV8-List: Glare Shield Edge From: Allan Grajek Just answer the question Al grajek On Apr 10, 2011, at 8:35, Hotmail wrote: > Wear your shoulder Barnard, problem solved. > > Sent from my iPad > > On Apr 10, 2011, at 7:20 AM, John Long wrote: > >> I am getting close to finish. a couple of months ago I saw some edging f or the glare shield on one of the websites. When I went back to order it, I could not find it again. >> >> If I was in an accident and went into the instrument panel, the glare shi eld would take the top of my head off from just above my eyes. What have pe ople done about the meat cleaver that the edge of the glare shield would be i n an accident? >> >> John >> N470MJ >> At the airport, & almost there. >> >> >> > > 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > ________________________________ Message 5 _____________________________________ Time: 10:09:28 AM PST US Subject: Re: RV8-List: Glare Shield Edge From: trc Heavy wall 3/4 inch rubber tubing......slit. glued. riveted at ends. A little black paint to match top of glareshield Allan Grajek wrote: >Just answer the question > >Al grajek > > >On Apr 10, 2011, at 8:35, Hotmail wrote: > >> Wear your shoulder Barnard, problem solved. >> >> Sent from my iPad >> >> On Apr 10, 2011, at 7:20 AM, John Long wrote: >> >>> I am getting close to finish. a couple of months ago I saw some edging for the glare shield on one of the websites. When I went back to order it, I could not find it again. >>> >>> If I was in an accident and went into the instrument panel, the glare shield would take the top of my head off from just above my eyes. What have people done about the meat cleaver that the edge of the glare shield would be in an accident? >>> >>> John >>> N470MJ >>> At the airport, & almost there. >>> >>> >>> >> >> >3D============================================ >3D============================================ >3D============================================ >3D============================================ >> ________________________________ Message 6 _____________________________________ Time: 12:31:03 PM PST US Subject: Re: RV8-List: Glare Shield Edge From: Vince Himsl West marine sells pinch edging. I went hdepot, bought 1/2" flex blue plastic pipe and then 1/2" black foam pipe insulation. Total = @6.00. good enough until u have better solution. Vince H. N8432 - 82 hrs Sent from my iPod On Apr 10, 2011, at 5:20 AM, John Long wrote: > I am getting close to finish. a couple of months ago I saw some edging fo r the glare shield on one of the websites. When I went back to order it, I c ould not find it again. > > If I was in an accident and went into the instrument panel, the glare shie ld would take the top of my head off from just above my eyes. What have peo ple done about the meat cleaver that the edge of the glare shield would be i n an accident? > > John > N470MJ > At the airport, & almost there. > > ========================== ========= ========================== ========= ========================== ========= ========================== ========= > ________________________________ Message 7 _____________________________________ Time: 01:37:16 PM PST US From: "Curtis White" Subject: Re: Spam:********, Re: RV8-List: Glare Shield Edge For a little more professional look. Google "piping". That's what it's called. You can buy in different lengths. Put some L1300 glue on it or any very good adhesive and you've got a great look and a safe edge. CRW in STT ----- Original Message ----- From: "trc" Sent: Sunday, April 10, 2011 12:07 PM Subject: Spam:********, Re: RV8-List: Glare Shield Edge > > Heavy wall 3/4 inch rubber tubing......slit. glued. riveted at ends. A > little black paint to match top of glareshield > > Allan Grajek wrote: > >>Just answer the question >> >>Al grajek >> >> >>On Apr 10, 2011, at 8:35, Hotmail wrote: >> >>> Wear your shoulder Barnard, problem solved. >>> >>> Sent from my iPad >>> >>> On Apr 10, 2011, at 7:20 AM, John Long wrote: >>> >>>> I am getting close to finish. a couple of months ago I saw some edging >>>> for the glare shield on one of the websites. When I went back to order >>>> it, I could not find it again. >>>> >>>> If I was in an accident and went into the instrument panel, the glare >>>> shield would take the top of my head off from just above my eyes. What >>>> have people done about the meat cleaver that the edge of the glare >>>> shield would be in an accident? >>>> >>>> John >>>> N470MJ >>>> At the airport, & almost there. >>>> >>>> >>>> >>> >>> >>3D============================================ >>3D============================================ >>3D============================================ >>3D============================================ >>> > > > ________________________________ Message 8 _____________________________________ Time: 01:48:47 PM PST US Subject: Re: Spam:********, Re: RV8-List: Glare Shield Edge From: Larry Bowen I used this stuff from Cleaveland Tool on my 8 and liked it. It's sort of minimal looking compared to Classic Aero, but sometimes thats a good thing. http://www.cleavelandtoolstore.com/prodinfo.asp?number=GSE54 -- Larry Bowen Larry@BowenAero.com http://BowenAero.com On Sun, Apr 10, 2011 at 5:31 PM, Curtis White wrote: > > > > For a little more professional look. Google "piping". That's what it's > called. You can buy in different lengths. Put some L1300 glue on it or any > very good adhesive and you've got a great look and a safe edge. > CRW in STT > ----- Original Message ----- From: "trc" > To: > Sent: Sunday, April 10, 2011 12:07 PM > Subject: Spam:********, Re: RV8-List: Glare Shield Edge > > >> >> Heavy wall 3/4 inch rubber tubing......slit. glued. riveted at ends. A >> little black paint to match top of glareshield >> >> Allan Grajek wrote: >> >> Just answer the question >>> >>> Al grajek >>> >>> >>> On Apr 10, 2011, at 8:35, Hotmail wrote: >>> >>> Wear your shoulder Barnard, problem solved. >>>> >>>> Sent from my iPad >>>> >>>> On Apr 10, 2011, at 7:20 AM, John Long wrote: >>>> >>>> I am getting close to finish. a couple of months ago I saw some edging >>>>> for the glare shield on one of the websites. When I went back to order it, >>>>> I could not find it again. >>>>> >>>>> If I was in an accident and went into the instrument panel, the glare >>>>> shield would take the top of my head off from just above my eyes. What have >>>>> people done about the meat cleaver that the edge of the glare shield would >>>>> be in an accident? >>>>> >>>>> John >>>>> N470MJ >>>>> At the airport, & almost there. >>>>> >>>>> >>>>> >>>>> >>>> >>>> 3D============================================ >>> >>> 3D============================================ >>> >>> 3D============================================ >>> >>> 3D============================================ >>> >>>> >>>> >> >> >> >> >> >> > > ________________________________ Message 9 _____________________________________ Time: 03:24:57 PM PST US From: Subject: Re: RV8-List: Glare Shield Edge I took a length of 3/8 aluminum tubing and split it. It would stay in place by its self but I glued it down and painted. Louis RV-8 This Year. ---- John Long wrote: > I am getting close to finish. a couple of months ago I saw some edging for > the glare shield on one of the websites. When I went back to order it, I > could not find it again. > > If I was in an accident and went into the instrument panel, the glare shield > would take the top of my head off from just above my eyes. What have people > done about the meat cleaver that the edge of the glare shield would be in an > accident? > > John > N470MJ > At the airport, & almost there. ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rv8-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RV8-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rv8-list Browse Digests http://www.matronics.com/digest/rv8-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.