Today's Message Index:
----------------------
1. 07:34 AM - Re: Wiring Connectors (Speedy11@aol.com)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Wiring Connectors |
Stan,
I can't recall needing a single-to-multiple or multiple-to-single
electrical connection during building. Seems like I brought all three position
lights to a single terminal on the switch. But, of course, the VPX may
require totally different wiring.
It should be relatively easy to construct, but Stein will surely have what
you need. He's also agreeable to a phone call.
Stan Sutterfield
_www.rv-8a.net_ (http://www.rv-8a.net)
PS - I remember now that I did have a terminal strip at the tail so as to
bring all the grounds into a single wire. Don't remember where I bought it
but I'm sure an internet search will provide sources.
In a message dated 5/5/2012 12:05:03 A.M. Pacific Daylight Time,
rv8-list@matronics.com writes:
It looks like I will have a need for several connectors/terminal strips
that can =9Csplit=9D a single power input to multiple
outputs. I=99m thinking position and strobe light wiring from
single VP-X output pins to AeroLED wing tips and rudder lights for
example. Anything out there that will do that? I can fab my own, but
would just as soon not have to start from scratch.
Stan Loer
RV8 QB
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|