Today's Message Index:
----------------------
1. 05:38 PM - Re: ADAHRS mounting hardware (speedy11@aol.com)
2. 08:39 PM - Re: Re: ADAHRS mounting hardware (Mike Koehn)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: ADAHRS mounting hardware |
Stan,
You are right on target.
I mounted mine in that very location and it has worked great.
Stan Sutterfield
Reno Race 84
Thanks to all for the feedback regarding sources for the subject
hardware. Guess I should not be so quick to grab the ACS catalog when a
trip to Home Depot or Lowes works just as well or better. As for
location, I too have chosen the aft fuselage, mounting the ADAHRS (not
yet purchased) on top of a tray bridging the upper longerons approx. 6
in. forward of the F809 bulkhead. It will be at least 24 in. from any
fixed magnetic source and I=99m keeping the aft fuselage wiring
runs as far away as possible. The canopy frame is another issue, but it
will only be a potential influence on the ground with the canopy open.
Stan Loer
RV-8 QB
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: ADAHRS mounting hardware |
Got Pictures?
From: owner-rv8-list-server@matronics.com
[mailto:owner-rv8-list-server@matronics.com] On Behalf Of speedy11@aol.com
Sent: Friday, September 20, 2013 5:37 PM
Subject: RV8-List: Re: ADAHRS mounting hardware
Stan,
You are right on target.
I mounted mine in that very location and it has worked great.
Stan Sutterfield
Reno Race 84
Thanks to all for the feedback regarding sources for the subject
hardware. Guess I should not be so quick to grab the ACS catalog when a
trip to Home Depot or Lowes works just as well or better. As for
location, I too have chosen the aft fuselage, mounting the ADAHRS (not
yet purchased) on top of a tray bridging the upper longerons approx. 6
in. forward of the F809 bulkhead. It will be at least 24 in. from any
fixed magnetic source and I=99m keeping the aft fuselage wiring
runs as far away as possible. The canopy frame is another issue, but it
will only be a potential influence on the ground with the canopy open.
Stan Loer
RV-8 QB
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|