----------------------------------------------------------
                           RV9-List Digest Archive
                                      ---
                     Total Messages Posted Mon 12/30/02: 4
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 06:14 AM - Re: Slider canopy  (Dave Nicholson)
     2. 10:49 AM - Re: Drain Valves  (Steve Sampson)
     3. 06:40 PM - What's this for?  (Tim)
     4. 07:03 PM - Re: What's this for?  (Ernest Kells)
 
 
 
________________________________  Message 1  _____________________________________


Time: 06:14:19 AM PST US
From: "Dave Nicholson" <dnick2@insightbb.com>
Subject: Re: RV9-List: Slider canopy

--> RV9-List message posted by: "Dave Nicholson" <dnick2@insightbb.com>

Roy,

I primed and painted the Slide Spacer C-763 because it is covered by the
Canopy Slide Rail C-762 which I left "bare" because the Slide Seal C-679 and
the Canopy Slider Block C-661 will wear off any coating

Dave
90347


----- Original Message -----
From: "Roy Taylor" <Royandjilly@btinternet.com>
Subject: RV9-List: Slider canopy


> --> RV9-List message posted by: "Roy Taylor" <Royandjilly@btinternet.com>
>
> Should I prime and paint the rear canopy slider bar or will it bind the
slider block or get rubbed off anyway?...just a small point, but you keep
answering my more fundamental questions just before I get there!
>
> Roy. Somerset U.K.
>






________________________________  Message 2  _____________________________________


Time: 10:49:37 AM PST US
From: "Steve Sampson" <SSampson.SLN21@london.edu>
Subject: RE: RV9-List: Drain Valves

--> RV9-List message posted by: "Steve Sampson" <SSampson.SLN21@london.edu>

Thanks again all for the info on drain valves and offers of taps. I think I
can find my way from here! Thanks, Steve

#90360
UK

PS What a nice community the RV9 group is!






________________________________  Message 3  _____________________________________


Time: 06:40:38 PM PST US
From: Tim <rv9a_000@deru.com>
Subject: RV9-List: What's this for?

--> RV9-List message posted by: Tim <rv9a_000@deru.com>

Howdy -

Can somebody please tell me what the rectangular
cutout is for on the forward seat floor, just aft
of the stick cutout?

It is not shown on all the drawings, and I can't
find anything that shows its purpose.

Thanks,
- Tim.






________________________________  Message 4  _____________________________________


Time: 07:03:13 PM PST US
From: "Ernest Kells" <ernest.kells@sympatico.ca>
Subject: Re: RV9-List: What's this for?

--> RV9-List message posted by: "Ernest Kells" <ernest.kells@sympatico.ca>

Tim: You are probably referring to the cutout for the "fifth" belt - the
crotch strap.  If you ordered the five point option you will have a full
drawing which shows all.  I have installed this option and am very happy
with the result.
Ernest Kells - RV-9A  O235-N2C,  Wood Prop
 Finish Kit 85% Complete

> Can somebody please tell me what the rectangular cutout is for on the
forward seat floor, just aftof the stick cutout?

> It is not shown on all the drawings, and I can't find anything that shows
its purpose.

> Thanks, Tim.