----------------------------------------------------------
                           RV9-List Digest Archive
                                      ---
                     Total Messages Posted Tue 02/18/03: 3
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 09:44 AM - Re: It's alive!  (Ken Moak)
     2. 12:51 PM - Elevator spar  (Joe Wiza)
     3. 01:11 PM - Re: Elevator spar  (Phil)
 
 
 
________________________________  Message 1  _____________________________________


Time: 09:44:57 AM PST US
From: Ken Moak <ken_moak@yahoo.com>
Subject: Re: RV9-List: It's alive!

--> RV9-List message posted by: Ken Moak <ken_moak@yahoo.com>

Congratulations.  Im jealous, but more motivated. 
Good luck on the upcoming big day.


--- Andy Karmy <andy@karmy.com> wrote:
> --> RV9-List message posted by: "Andy Karmy"
> <andy@karmy.com>
> 
> WOW What a feeling, it's alive!
> 
> First engine run was successful! With a belch of
> smoke, a spray of oil... Yep you guessed it, another
> Lycoming comes to life. Here's some pictures to keep
> you all building!
> 
>
http://www.karmy.com/rv9a/pictures/assembly/EngineStart/index.htm
> 
> - Andy Karmy
>   RV9A Seattle WA
>   Inspection Today!
> 
> 
>
> Contributions
> any other
> Forums.
>
> latest messages.
> List members.
>
> http://www.matronics.com/subscription
> http://www.matronics.com/FAQ/RV9-List.htm
> Digests:http://www.matronics.com/digest/rv9-list
> http://www.matronics.com/archives
> http://www.matronics.com/photoshare
> http://www.matronics.com/emaillists
>
> 
> 
> 
> 






________________________________  Message 2  _____________________________________


Time: 12:51:00 PM PST US
Subject: RV9-List: Elevator spar
From: Joe Wiza <planejoel@juno.com>

--> RV9-List message posted by: Joe Wiza <planejoel@juno.com>

I #40 drilled all the elev skin holes and dimpled. Reading ahead I see
that the top of the spar gets 3/32 rivets and the bottom #30 for the pop
rivets. Do I drill and machine counter sink the bottom of the spar to #30
???????   Thanks ahead.

RV9A                                                                     
          Joe                 






________________________________  Message 3  _____________________________________


Time: 01:11:10 PM PST US
From: "Phil" <Phil@camsnet.com>
Subject: RE: RV9-List: Elevator spar

--> RV9-List message posted by: "Phil" <Phil@camsnet.com>

Hello Joe

I drilled #30 and dimpled #30.  I squeeze as many rivets as I could w/ 1/8"
countersunk
rivet and blind riveted the rest.

Do a quick test of a #30 and #6 dimple to compare the fit of a blind rivet.

Phil


--> RV9-List message posted by: Joe Wiza <planejoel@juno.com>

I #40 drilled all the elev skin holes and dimpled. Reading ahead I see
that the top of the spar gets 3/32 rivets and the bottom #30 for the pop
rivets. Do I drill and machine counter sink the bottom of the spar to #30
???????   Thanks ahead.

RV9A
          Joe