---------------------------------------------------------- RV9-List Digest Archive --- Total Messages Posted Tue 02/25/03: 7 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 05:56 AM - Re: Fw: Elevator Trim Indicator (Dale Larsen) 2. 07:57 AM - Flight pictures! (Andy Karmy) 3. 08:43 AM - (no subject) (KDMIGAS@aol.com) 4. 09:01 AM - Re: (no subject) (Larry PERRYMAN) 5. 05:25 PM - Yahoo RV list (Albert Gardner) 6. 07:07 PM - Re: Fw: Elevator Trim Indicator (Douglas A. Fischer) 7. 10:53 PM - Re: Yahoo RV list (Gary) ________________________________ Message 1 _____________________________________ Time: 05:56:25 AM PST US From: "Dale Larsen" Subject: Re: RV9-List: Fw: Elevator Trim Indicator --> RV9-List message posted by: "Dale Larsen" > I was over last Saturday checking out Sam Benjamin's 9A and noticed the elevator trim indicator on the panel. I want to have an indicator but also want manual elevator trim. Does anyone know of a panel indicator that works with the manual elevator trim? Thanks in advance for any info! Doug, The Ray Allen Comapny has just what you need. See: http://www.menzimeraircraft.com/products/indsens.html You will need a position sensor, and an indicator. Then just find a place where the travel of the trim system is equal to the travel of the sensor and mount it. Dale ________________________________ Message 2 _____________________________________ Time: 07:57:08 AM PST US From: "Andy Karmy" Subject: RV9-List: Flight pictures! --> RV9-List message posted by: "Andy Karmy" Ok for those that asked about it, the pictures are up on my website of the first flight of N169AK. WARNING if you use dialup it will take a long time to load. http://www.karmy.com/rv9a - Andy Karmy RV9A Seattle WA 7.1hrs TT ________________________________ Message 3 _____________________________________ Time: 08:43:18 AM PST US From: KDMIGAS@aol.com Subject: RV9-List: (no subject) --> RV9-List message posted by: KDMIGAS@aol.com Anybody know of a good website or other info on avionic installation and/or general info on what works at a reasonable price?? What is everybody using??thanks Dick Migas,#90558, wings done ________________________________ Message 4 _____________________________________ Time: 09:01:48 AM PST US Subject: Re: RV9-List: (no subject) From: "Larry PERRYMAN" 02/25/2003 06:00:49 PM, Serialize complete at 02/25/2003 06:00:49 PM --> RV9-List message posted by: "Larry PERRYMAN" Try http://groups.yahoo.com/group/ExperimentalAvionics Good general info and some technical info there. Ask your questions and folks will respond. Regards, Larry Perryman N194DL KDMIGAS@aol.com 02/25/2003 10:41 AM Please respond to rv9-list To: rv9-list@matronics.com cc: Subject: RV9-List: (no subject) --> RV9-List message posted by: KDMIGAS@aol.com Anybody know of a good website or other info on avionic installation and/or general info on what works at a reasonable price?? What is everybody using??thanks Dick Migas,#90558, wings done ________________________________ Message 5 _____________________________________ Time: 05:25:20 PM PST US From: "Albert Gardner" Subject: RV9-List: Yahoo RV list --> RV9-List message posted by: "Albert Gardner" Well, there might be a downside. I signed on to Yahoo just for the RV9 list and I have been inundated with spam-20 to 30 a day. Now I can't seem to cancel. Many builders seem to be posting to both lists anyway so we don't miss much. Albert Gardner 9-0132 ________________________________ Message 6 _____________________________________ Time: 07:07:09 PM PST US From: "Douglas A. Fischer" Subject: Re: RV9-List: Fw: Elevator Trim Indicator --> RV9-List message posted by: "Douglas A. Fischer" Thanks for the info, Dale! I knew Ray Allen sold the indicator for their electric trim but didn't know they also had position sensors. They sell three travel lengths: 0.5", 0.7", and 1.2". You wouldn't happen to know the cable longitudinal travel from full-up to full-down would you? That tidbit of info would determine the sensor needed. Thank again for the help! Doug Fischer Jenison, MI RV-9A #90706 Empennage ----- Original Message ----- From: "Dale Larsen" Subject: Re: RV9-List: Fw: Elevator Trim Indicator > --> RV9-List message posted by: "Dale Larsen" > > > I was over last Saturday checking out Sam Benjamin's 9A and noticed the > elevator trim indicator on the panel. I want to have an indicator but also > want manual elevator trim. Does anyone know of a panel indicator that works > with the manual elevator trim? Thanks in advance for any info! > > Doug, > > The Ray Allen Comapny has just what you need. See: > http://www.menzimeraircraft.com/products/indsens.html > > You will need a position sensor, and an indicator. Then just find a place > where the travel of the trim system is equal to the travel of the sensor and > mount it. > > Dale > > ________________________________ Message 7 _____________________________________ Time: 10:53:24 PM PST US From: "Gary" Subject: Re: RV9-List: Yahoo RV list --> RV9-List message posted by: "Gary" I had the same trouble with anything "Yahoo". Gary ----- Original Message ----- From: Albert Gardner To: rv9-list@matronics.com Sent: Tuesday, February 25, 2003 6:21 PM Subject: RV9-List: Yahoo RV list --> RV9-List message posted by: "Albert Gardner" Well, there might be a downside. I signed on to Yahoo just for the RV9 list and I have been inundated with spam-20 to 30 a day. Now I can't seem to cancel. Many builders seem to be posting to both lists anyway so we don't miss much. Albert Gardner 9-0132 --- Version: 6.0.431 / Virus Database: 242 - Release Date: 12/17/02