----------------------------------------------------------
                           RV9-List Digest Archive
                                      ---
                     Total Messages Posted Thu 02/27/03: 2
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 02:55 PM - Re: Fw: Elevator Trim Indicator  (John Oliveira)
     2. 07:33 PM - Re: Fw: Elevator Trim Indicator  (Douglas A. Fischer)
 
 
 
________________________________  Message 1  _____________________________________


Time: 02:55:44 PM PST US
From: John Oliveira <oliveira@frontiernet.net>
Subject: Re: RV9-List: Fw: Elevator Trim Indicator

--> RV9-List message posted by: John Oliveira <oliveira@frontiernet.net>

Like your N number.  Mine is N909RV

Waiting for the fuselage to arrive


Rob W M Shipley wrote:

>--> RV9-List message posted by: "Rob W M Shipley" <Rob@RobsGlass.com>
>
>The MAC product with a position sensor sounds as if it might also be a neat solution
for anyone looking for a flap posiyion indicator.  Thoughts on this?
>Rob
>Rob W M Shipley
>RV9A N919RV Fuselage.
>
>






________________________________  Message 2  _____________________________________


Time: 07:33:23 PM PST US
From: "Douglas A. Fischer" <dfischer@iserv.net>
Subject: Re: RV9-List: Fw: Elevator Trim Indicator

--> RV9-List message posted by: "Douglas A. Fischer" <dfischer@iserv.net>

Wasn't able to see the picture you mention (couldn't even see an
attachment).  Does this picture show a manual elevator trim using the Ray
Allen (MAC) sensor?  I know it works with electric, but I'd prefer manual.
I also noticed from Van's site that the elevator trim MAC servo travel is
1.2", so that part of my earlier message is answered.  Thanks for all the
help out there!

Doug Fischer
Jenison, MI
RV-9A #90706
Empennage

----- Original Message -----
From: "Dave Nicholson" <dnick2@insightbb.com>
Subject: Re: RV9-List: Fw: Elevator Trim Indicator


> --> RV9-List message posted by: "Dave Nicholson" <dnick2@insightbb.com>
>
> That's what I used.  Here's a picture.
>
> Dave
> 90347
>
> ----- Original Message -----
> From: "Rob W M Shipley" <Rob@RobsGlass.com>
> To: "RV9-List Digest Server" <rv9-list-digest@matronics.com>
> Subject: RV9-List: Fw: Elevator Trim Indicator
>
>
> > --> RV9-List message posted by: "Rob W M Shipley" <Rob@RobsGlass.com>
> >
> > The MAC product with a position sensor sounds as if it might also be a
> neat solution for anyone looking for a flap posiyion indicator.  Thoughts
on
> this?
> > Rob
> > Rob W M Shipley
> > RV9A N919RV Fuselage.
> >
>
>