----------------------------------------------------------
                           RV9-List Digest Archive
                                      ---
                     Total Messages Posted Wed 03/19/03: 2
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 08:11 AM - Re: Hole in Skin Resolved  (Terry Hobert)
     2. 07:48 PM - Re: Hole in Skin Resolved  (DThomas773@aol.com)
 
 
 
________________________________  Message 1  _____________________________________


Time: 08:11:14 AM PST US
From: "Terry Hobert" <terhobey@hotmail.com>
Subject: Re: RV9-List: Hole in Skin Resolved

--> RV9-List message posted by: "Terry Hobert" <terhobey@hotmail.com>

Ken,
Don't feel bad, I did almost the exact same thing, only I was using a hand 
squeezer!  Figure that out.  I have done a few dumb things by not thinking 
completely through the process ahead, usually like you said, late at night 
getting ready to shut down.  Luckily I have been able to fix all of them, so 
far!
Good Job,

Terry 9A finishing up last elevator, ordering wing kit.


>From: Ken Moak <ken_moak@yahoo.com>
>Reply-To: rv9-list@matronics.com
>To: rv9-list@matronics.com
>Subject: Re: RV9-List: Hole in Skin Resolved
>Date: Tue, 18 Mar 2003 20:24:47 -0800 (PST)
>
>--> RV9-List message posted by: Ken Moak <ken_moak@yahoo.com>
>
>Wish I could say you were the first to do it!
>
>Ken
>
>Do not archive
>
>--- Glenn Brasch <gbrasch@earthlink.net> wrote:
> > --> RV9-List message posted by: "Glenn Brasch"
> > <gbrasch@earthlink.net>
> >
> > It didn't take Scott Brown long to solve my problem
> > (about 5 minutes) to put a rivet in the hole, which
> > will be covered later in the finishing process.
> > DUH!  Looks good already.  Thanks!
> >
> >
> >
> > Contributions
> > any other
> > Forums.
> >
> > latest messages.
> > List members.
> >
> > http://www.matronics.com/subscription
> > http://www.matronics.com/FAQ/RV9-List.htm
> > Digests:http://www.matronics.com/digest/rv9-list
> > http://www.matronics.com/archives
> > http://www.matronics.com/photoshare
> > http://www.matronics.com/emaillists
> >
> >
> >
> >
> >
>
>
>http://platinum.yahoo.com
>
>






________________________________  Message 2  _____________________________________


Time: 07:48:09 PM PST US
From: DThomas773@aol.com
Subject: Re: RV9-List: Hole in Skin Resolved

--> RV9-List message posted by: DThomas773@aol.com

Hi Guys,
When I was back riveting my rudder skin to the stiffeners I riveted right off 
the the back plate and sliced a big cut in the skin.  $70 bucks, a 5 day 
delay while new parts were being delivered and I learned to more careull. For 
awhile at least.


Dennis Thomas
Fuselage