Today's Message Index:
----------------------
1. 01:43 AM - Re: Philipines (Steve Sampson)
2. 03:23 PM - Flap hinge bracket (The Strong's)
3. 04:11 PM - Re: Flap hinge bracket (Edcarris@aol.com)
4. 09:45 PM - Re: Flap hinge bracket (Mike Duiven)
Message 1
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
--> RV9-List message posted by: "Steve Sampson" <SSampson.SLN21@london.edu>
Jim - you have your answer from others. No complaints about the
workmanship....its better than mine. They just like filling holes with
rivets even when it says don't! Steve.
PS I believe the Czech ones are exceptionally good, but then they are the
best engineers. Havnt seen one.
-----Original Message-----
From: owner-rv9-list-server@matronics.com
[mailto:owner-rv9-list-server@matronics.com] On Behalf Of Jim Smith
Subject: RV9-List: Philipines
--> RV9-List message posted by: "Jim Smith" <jsmith@openairnet.com>
Whoa... "Philipines"?
Hi Steve. I just joined the rv9 group and am thinking of building one. Could
you elaborate on the "Philipines" thing. Does Van send his QBs out?
Thanks!
Jim
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Flap hinge bracket |
--> RV9-List message posted by: "The Strong's" <tstrong@ida.net>
I am working on the flap hinge brackets. I've found the W-925B parts but
it says to make the W925C parts out of AA6-063x3/4x3/4.
As near as I can figure the only AA6-063x3/4x3/4 I have are 2 pieces 12'
long. Is this the piece I should use? I can't figure what
these two 12' pieces are for unless they are suppose to be saved for the
fuselage.
Thanks, Tom
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Flap hinge bracket |
--> RV9-List message posted by: Edcarris@aol.com
Look at the last page of your inventory sheet.
Message 4
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Flap hinge bracket |
--> RV9-List message posted by: "Mike Duiven" <emduiven@chaffee.net>
I called Van's and they indicated you should cut the 12' hunk to length.
You'll need more in the Fuselage so don't use it all!
Mike Duiven
----- Original Message -----
From: "The Strong's" <tstrong@ida.net>
Subject: RV9-List: Flap hinge bracket
> --> RV9-List message posted by: "The Strong's" <tstrong@ida.net>
>
> I am working on the flap hinge brackets. I've found the W-925B parts but
> it says to make the W925C parts out of AA6-063x3/4x3/4.
> As near as I can figure the only AA6-063x3/4x3/4 I have are 2 pieces 12'
> long. Is this the piece I should use? I can't figure what
> these two 12' pieces are for unless they are suppose to be saved for the
> fuselage.
>
> Thanks, Tom
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|