----------------------------------------------------------
                           RV9-List Digest Archive
                                      ---
                     Total Messages Posted Sun 04/06/03: 4
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 01:43 AM - Re: Philipines  (Steve Sampson)
     2. 03:23 PM - Flap hinge bracket  (The Strong's)
     3. 04:11 PM - Re: Flap hinge bracket  (Edcarris@aol.com)
     4. 09:45 PM - Re: Flap hinge bracket  (Mike Duiven)
 
 
 
________________________________  Message 1  _____________________________________


Time: 01:43:25 AM PST US
From: "Steve Sampson" <SSampson.SLN21@london.edu>
Subject: RE: RV9-List: Philipines

--> RV9-List message posted by: "Steve Sampson" <SSampson.SLN21@london.edu>

Jim - you have your answer from others. No complaints about the
workmanship....its better than mine. They just like filling holes with
rivets even when it says don't! Steve.

PS I believe the Czech ones are exceptionally good, but then they are the
best engineers. Havnt seen one.

 -----Original Message-----
From:         owner-rv9-list-server@matronics.com
[mailto:owner-rv9-list-server@matronics.com]  On Behalf Of Jim Smith
Subject:        RV9-List: Philipines

--> RV9-List message posted by: "Jim Smith" <jsmith@openairnet.com>

Whoa... "Philipines"?
Hi Steve. I just joined the rv9 group and am thinking of building one. Could
you elaborate on the "Philipines" thing. Does Van send his QBs out?

Thanks!
Jim






________________________________  Message 2  _____________________________________


Time: 03:23:22 PM PST US
From: "The Strong's" <tstrong@ida.net>
Subject: RV9-List: Flap hinge bracket

--> RV9-List message posted by: "The Strong's" <tstrong@ida.net>

I am working on the flap hinge brackets.  I've found the W-925B parts but 
it says to make the W925C parts out of  AA6-063x3/4x3/4.
As near as I can figure the only AA6-063x3/4x3/4 I have are 2 pieces 12' 
long.  Is this the piece I should use?  I can't figure what
these two 12' pieces are for unless they are suppose to be saved for the 
fuselage.

Thanks,  Tom






________________________________  Message 3  _____________________________________


Time: 04:11:44 PM PST US
From: Edcarris@aol.com
Subject: Re: RV9-List: Flap hinge bracket

--> RV9-List message posted by: Edcarris@aol.com

Look at the last page of your inventory sheet.






________________________________  Message 4  _____________________________________


Time: 09:45:19 PM PST US
From: "Mike Duiven" <emduiven@chaffee.net>
Subject: Re: RV9-List: Flap hinge bracket

--> RV9-List message posted by: "Mike Duiven" <emduiven@chaffee.net>

I called Van's and they indicated you should cut the 12' hunk to length.
You'll need more in the Fuselage so don't use it all!

Mike Duiven
----- Original Message -----
From: "The Strong's" <tstrong@ida.net>
Subject: RV9-List: Flap hinge bracket


> --> RV9-List message posted by: "The Strong's" <tstrong@ida.net>
>
> I am working on the flap hinge brackets.  I've found the W-925B parts but
> it says to make the W925C parts out of  AA6-063x3/4x3/4.
> As near as I can figure the only AA6-063x3/4x3/4 I have are 2 pieces 12'
> long.  Is this the piece I should use?  I can't figure what
> these two 12' pieces are for unless they are suppose to be saved for the
> fuselage.
>
> Thanks,  Tom
>
>