Today's Message Index:
----------------------
1. 05:37 AM - switch and breaker screw connections (Bobdeva@aol.com)
2. 07:32 AM - Re: Loosening screws by vibration (Gary)
3. 10:53 AM - Nose wheel (Steve Sampson)
4. 12:57 PM - Re: Nose wheel (Andy Karmy)
5. 01:11 PM - Re: Nose wheel (Im7shannon@aol.com)
6. 02:41 PM - Re: Nose wheel (Husek)
7. 04:42 PM - Re: Nose wheel (Cy Galley)
8. 07:42 PM - New 9A Flying (ssss)
9. 07:45 PM - Re: New 9A Flying (DThomas773@aol.com)
10. 07:57 PM - Re: New 9A Flying (Ted Strand)
11. 08:20 PM - Re: New 9A Flying (Todd Houg)
12. 08:26 PM - Re: New 9A Flying (Ken Moak)
13. 09:20 PM - Re: New 9A Flying (Ralph Cloud)
Message 1
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | switch and breaker screw connections |
--> RV9-List message posted by: Bobdeva@aol.com
The only thing I've used over many years are internal tooth lock washers.
Can't ever recall one coming loose. Matter of fact, the manufacturers claim
they tend to dig in more with vibration. They are available from size #2 up
to 1/2 in. in stainless from www.smallparts.com. Size #2 thru #10 are $3.50
per hundred or $1.15 per 25.
Such a deal!
Bob Devaney
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Loosening screws by vibration |
--> RV9-List message posted by: "Gary" <rv9er@3rivers.net>
Yes, there is a much better way. Use the fast-on connectors advocated by Nuckolls
at Aeroelectric Connection.
I suppose this won't help you much at this point, if you already have the screw
type switches and breakers.
Gary
----- Original Message -----
From: Leland
To: RV9 List
Sent: Thursday, April 17, 2003 12:01 AM
Subject: RV9-List: Loosening screws by vibration
--> RV9-List message posted by: Leland <Federigo@pacbell.net>
I am wiring up the panel and wonder what keeps the screws on the
switches and breakers from coming loose. The switch/breaker screws have
flat washers at best and some of the switches don't even have washers,
leave alone lock washers or lock nuts. Is it best to put these in with a
thread locking compound, or is there a better way?
Leland in Pleasanton
---
Version: 6.0.471 / Virus Database: 269 - Release Date: 4/14/03
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> RV9-List message posted by: "Steve Sampson" <SSampson.SLN21@london.edu>
What is good practice with the nosewheel? Does the interior need to be
primed and the exterior primed and painted or is it in fact anodised?
Thanks, Steve.
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> RV9-List message posted by: "Andy Karmy" <andy@karmy.com>
I etched and primed the fork assembly, but left the actual nosewheel alone. It
seemed nice and shiny, but I'm not clear if it's protected or not.
- Andy
---------- Original Message ----------------------------------
From: "Steve Sampson" <SSampson.SLN21@london.edu>
>--> RV9-List message posted by: "Steve Sampson" <SSampson.SLN21@london.edu>
>
>What is good practice with the nosewheel? Does the interior need to be
>primed and the exterior primed and painted or is it in fact anodised?
>
>Thanks, Steve.
>
>
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> RV9-List message posted by: Im7shannon@aol.com
So your on the ground long enough to peck on a keyboard eh? Or do you have a
laptop in the cockpit now?
Have you started doing any paint work yet? I have been doing some research on
finding or developing a good coating that will come out looking like polished
aluminum. I could fill you in on my progress if youre interested.
Kevin
do not archive
Message 6
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> RV9-List message posted by: "Husek" <husek@clis.com>
Please help me if you can..I can't get unsubscribed to the matronisc email
lists...I am receiving over 300 messages per day!
----- Original Message -----
From: "Andy Karmy" <andy@karmy.com>
Subject: Re: RV9-List: Nose wheel
> --> RV9-List message posted by: "Andy Karmy" <andy@karmy.com>
>
> I etched and primed the fork assembly, but left the actual nosewheel
alone. It seemed nice and shiny, but I'm not clear if it's protected or not.
>
> - Andy
>
> ---------- Original Message ----------------------------------
> From: "Steve Sampson" <SSampson.SLN21@london.edu>
> Date: Thu, 17 Apr 2003 05:57:17 +0100
>
> >--> RV9-List message posted by: "Steve Sampson"
<SSampson.SLN21@london.edu>
> >
> >What is good practice with the nosewheel? Does the interior need to be
> >primed and the exterior primed and painted or is it in fact anodised?
> >
> >Thanks, Steve.
> >
> >
>
>
> ---
> [This E-mail scanned for viruses by Cape Lookout Mail Server]
>
>
---
[This E-mail scanned for viruses by Cape Lookout Mail Server]
Message 7
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> RV9-List message posted by: "Cy Galley" <cgalley@qcbc.org>
Got to READ... At the bottom of each every message is this line.
UN/SUBSCRIBE: http://www.matronics.com/subscription
Click on it and change your subscription.
Cy Galley - Bellanca Champion Club
Newsletter Editor & EAA TC
www.bellanca-championclub.com
We support Aeroncas
----- Original Message -----
From: "Husek" <husek@clis.com>
Subject: Re: RV9-List: Nose wheel
> --> RV9-List message posted by: "Husek" <husek@clis.com>
>
> Please help me if you can..I can't get unsubscribed to the matronisc email
> lists...I am receiving over 300 messages per day!
> ----- Original Message -----
> From: "Andy Karmy" <andy@karmy.com>
> To: <rv9-list@matronics.com>
> Subject: Re: RV9-List: Nose wheel
>
>
> > --> RV9-List message posted by: "Andy Karmy" <andy@karmy.com>
> >
> > I etched and primed the fork assembly, but left the actual nosewheel
> alone. It seemed nice and shiny, but I'm not clear if it's protected or
not.
> >
> > - Andy
> >
> > ---------- Original Message ----------------------------------
> > From: "Steve Sampson" <SSampson.SLN21@london.edu>
> > Date: Thu, 17 Apr 2003 05:57:17 +0100
> >
> > >--> RV9-List message posted by: "Steve Sampson"
> <SSampson.SLN21@london.edu>
> > >
> > >What is good practice with the nosewheel? Does the interior need to be
> > >primed and the exterior primed and painted or is it in fact anodised?
> > >
> > >Thanks, Steve.
> > >
> > >
> >
> >
> > ---
> > [This E-mail scanned for viruses by Cape Lookout Mail Server]
> >
> >
>
> ---
> [This E-mail scanned for viruses by Cape Lookout Mail Server]
>
>
Message 8
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> RV9-List message posted by: "ssss" <albert.gardner@worldnet.att.net>
After 2-1/2 years N872RV has left the ground and now has 3.5 hours total.
Flys great and so far performs very nice. Collecting data but mainly just
having fun flying.
Albert Gardner
9-0132
Message 9
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: New 9A Flying |
--> RV9-List message posted by: DThomas773@aol.com
Congtratulations Al. Keep flying and keep on having fun.
Dennis Thomas
fuselage
Message 10
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> RV9-List message posted by: "Ted Strand" <tstrand@strandcentral.com>
Awesome News!!
Congratulations, and keep us posted with your flight data.
-Ted Strand-
Clearwater, FL
Wing Skeleton
-----Original Message-----
From: ssss [mailto:albert.gardner@worldnet.att.net]
Subject: RV9-List: New 9A Flying
--> RV9-List message posted by: "ssss" <albert.gardner@worldnet.att.net>
After 2-1/2 years N872RV has left the ground and now has 3.5 hours
total.
Flys great and so far performs very nice. Collecting data but mainly
just
having fun flying.
Albert Gardner
9-0132
Message 11
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> RV9-List message posted by: Todd Houg <thoug@attglobal.net>
Excellent! Congratulations Albert!
Keep us posted on your test period data. We would all like to hear what kind of
performance you're getting and how your engine and prop combination is working
out.
Todd Houg
90196 - still way behind Albert!
-----Original Message-----
From: ssss
Subject: RV9-List: New 9A Flying
--> RV9-List message posted by: "ssss" <albert.gardner@worldnet.att.net>
After 2-1/2 years N872RV has left the ground and now has 3.5 hours total.
Flys great and so far performs very nice. Collecting data but mainly just
having fun flying.
Albert Gardner
9-0132
eJ8+IioDAQaQCAAEAAAAAAABAAEAAQeQBgAIAAAA5AQAAAAAAADoAAEIgAcAGAAAAElQTS5NaWNy
b3NvZnQgTWFpbC5Ob3RlADEIAQ2ABAACAAAAAgACAAEEkAYAtAEAAAEAAAAQAAAAAwAAMAIAAAAL
AA8OAAAAAAIB/w8BAAAASwAAAAAAAACBKx+kvqMQGZ1uAN0BD1QCAAAAAHJ2OS1saXN0QG1hdHJv
bmljcy5jb20AU01UUABydjktbGlzdEBtYXRyb25pY3MuY29tAAAeAAIwAQAAAAUAAABTTVRQAAAA
AB4AAzABAAAAFwAAAHJ2OS1saXN0QG1hdHJvbmljcy5jb20AAAMAFQwBAAAAAwD+DwYAAAAeAAEw
AQAAABkAAAAncnY5LWxpc3RAbWF0cm9uaWNzLmNvbScAAAAAAgELMAEAAAAcAAAAU01UUDpSVjkt
TElTVEBNQVRST05JQ1MuQ09NAAMAADkAAAAACwBAOgEAAAAeAPZfAQAAABcAAABydjktbGlzdEBt
YXRyb25pY3MuY29tAAACAfdfAQAAAEsAAAAAAAAAgSsfpL6jEBmdbgDdAQ9UAgAAAABydjktbGlz
dEBtYXRyb25pY3MuY29tAFNNVFAAcnY5LWxpc3RAbWF0cm9uaWNzLmNvbQAAAwD9XwEAAAADAP9f
AAAAAAIB9g8BAAAABAAAAAAAAAJpXgEEgAEAHAAAAFJFOiBSVjktTGlzdDogTmV3IDlBIEZseWlu
ZwBCCAEFgAMADgAAANMHBAARABYAFAAoAAQARQEBIIADAA4AAADTBwQAEQAWABIALQAEAEgBAQmA
AQAhAAAAMjJBQTAwMEExRTFEQUI0NUE5MUY1OUM3NDZDNjc1RTcAMgcBA5AGAEwIAAAhAAAACwAC
AAEAAAALACMAAAAAAAMAJgAAAAAACwApAAAAAAADAC4AAAAAAAMANgAAAAAAQAA5ACD9LX1ZBcMB
HgBwAAEAAAAcAAAAUkU6IFJWOS1MaXN0OiBOZXcgOUEgRmx5aW5nAAIBcQABAAAAFgAAAAHDBVl9
JP6GVVU1FEgkvHk4g7eleRsAAB4AHgwBAAAABQAAAFNNVFAAAAAAHgAfDAEAAAAUAAAAdGhvdWdA
YXR0Z2xvYmFsLm5ldAADAAYQnsQxTAMABxBaBgAAHgAIEAEAAABlAAAARVhDRUxMRU5UQ09OR1JB
VFVMQVRJT05TQUxCRVJUS0VFUFVTUE9TVEVET05ZT1VSVEVTVFBFUklPRERBVEFXRVdPVUxEQUxM
TElLRVRPSEVBUldIQVRLSU5ET0ZQRVJGT1JNQQAAAAACAQkQAQAAADAFAAAsBQAA7QkAAExaRnXf
o4rJPwAKAQMB9wKkA+MCAGNowQrAc2V0MCAHEwKDQwBQDuZwcnEyD+Z9EwqACMggOwlvMjU1SwKA
CoF2CJB3awuAZNo0DGBjAFALA2MAQQtgQG5nMTAzMwumIEBFeGNlbGwJ8HQYISAgCFAWAHJhdDJ1
C2B0aQIgBCBBbL5iBJAXcAqiCoQKgEsJ4AhwIHUEIHBvc3SlCYAgAiAgeQhhIBqQTxqAGlAGcQRw
IGQYAGFALiBXZSB3CGBsRxqwB0ADIGxpaxyAdNBvIGhlCsF3D3AFQNsUshrAZhuSAhByA4EXEOUa
8icJcCBnD7AYUBYAcxzwHoFobwfgGwMJ8GfvC4AcgCCSETBvGhAFoAbQ2wuAGEMgBAAckXIUsSBw
mQhgdC4ZKgyCIFQEcBUasEgIYGckeTkwMeA5NiAtIBqAAxADINB3YXkgGNBoHnIYv+cKhAswHUAz
NgFAFaABQNMiERqQY3QQdDEmoSsiPk8FECGBB0AF0AeQc2F/IBArIxkmKjQqAQsTKjZpMC0xNDQB
QB1AMTheMAFADNAuwyUARgNhOv0Mg2IP0AQQBBIZNCUABmBTAjAwV1RoCHBzHBB5ziwP4BEwAxEx
NzMQAdCTFjAmUDo0EWBQTTE3wyUgMFdydjktHUAagBpAAMB0A2ADAGNzLmMiYTE4dWJqKmEwV1Iq
VjXwTDYhOgezOUH5MABseSBRLM8t2imEC7brGTMrID44tyAHgSwyGlYUYnk5QCIw4iIgPDMHQCgS
LmcLESGgckB/I1Ec0CGgI/AYACPwQPE+vRkqQQGABJAzwC6wLxFgdnkd0QehOAHAOMAdsGF/BCAd
MAFxG0AdwCAAA2B1Gx6BIJJuIOFEAjMuNe8gwTKxHYEBkGwkBTnRBCDXCcEeMSCScx2gZgrBHuXd
BCB2BJAnYDaxZRxQCFD/FzEqcCBSHBIncCPgPfALcfk54CBqGjAqgBkzD3AUcH0gYWZFEEiAOeMk
BSf0IJ5HQDQZJDXwJnAzMihu8QqAXy09UM9R31LvU//+PVBHF5BVuibAMpAcgD13lkVLUQMgRgWw
dW0msL9VKDKQIyEfEVgRIyFzGmDvAIAFsBqhF1FpCXBLkUSguUTxZ2hEkxexNoBpSxH/GGJVKB6x
PbUG0ASQNuAXkP5ZH7EdESGgSWEm0AngJ3D3AHBAYRzwZAQgBbEAcCdgvypAHcBOtVWCHxIeomRa
of8qcF/BSWEYUACQI6IDoESi/k02dlfUNuBQT2WvZr9nz4tUj1WRIReATkVXBADXW2BqIFUoQgNg
dw+gXVOZOUAgVWvBGwN3ZSUA/mJrkxsxHaAUch0wGAAbYl8+BWSJNGAg0B2RUw9xZd9sMXAzGlBv
4gQgJkiAAxD/B5ED8ESgYHRdXGSvdI91n+92r2jvVZE9s1IXIG5BGrDcSW4fExhSVSlQGnEr9g9s
MTXfNulVg1VOL1MAVUJTQ1JJQkUFbDFoAkBwOi8vd+V/kC58uy9zN9AE9Hpc8T2zRkFRbDFVsn8v
gDb1gnEvOMYugxB9egZgCsD/D2AW4CFzOUCDH4A3hmNVKfg3LUQnUWuEfv+ACW00bi98JlUpa4VE
K5AbYXP+OorfgDZh8I6SjM9VoQcQ/Q9gaUlgjtCCv3/chnKSYn96im/rkw+AJ3EUcEKBflP9G6Bj
BpA2wIcvgBiQ/xeQ/k9yZ5KTmp+ANl3AV6F8Yv+VGlvLmn+AGAWgW+hzj6Vvv6Z/p493zqlPT9sR
8QCrwAMAEBAAAAAAAwAREAAAAAADAIAQ/////0AABzBAs5c4WQXDAUAACDBAs5c4WQXDAQsAAIAI
IAYAAAAAAMAAAAAAAABGAAAAAAOFAAAAAAAAAwACgAggBgAAAAAAwAAAAAAAAEYAAAAAEIUAAAAA
AAADAAWACCAGAAAAAADAAAAAAAAARgAAAABShQAAtw0AAAMACYAIIAYAAAAAAMAAAAAAAABGAAAA
AAGFAAAAAAAAHgATgAggBgAAAAAAwAAAAAAAAEYAAAAAVIUAAAEAAAAEAAAAOC4wAAsAF4AIIAYA
AAAAAMAAAAAAAABGAAAAAA6FAAAAAAAAAwAYgAggBgAAAAAAwAAAAAAAAEYAAAAAEYUAAAAAAAAD
ABqACCAGAAAAAADAAAAAAAAARgAAAAAYhQAAAAAAAB4AKYAIIAYAAAAAAMAAAAAAAABGAAAAADaF
AAABAAAAAQAAAAAAAAAeACqACCAGAAAAAADAAAAAAAAARgAAAAA3hQAAAQAAAAEAAAAAAAAAHgAr
gAggBgAAAAAAwAAAAAAAAEYAAAAAOIUAAAEAAAABAAAAAAAAAB4APQABAAAABQAAAFJFOiAAAAAA
AwANNP03AADvLQ==
Message 12
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: New 9A Flying |
--> RV9-List message posted by: Ken Moak <ken_moak@yahoo.com>
Congratulations!!!
Hope the testing goes well and please keep us posted.
Blue Skies
Ken
Do not archive
--- ssss <albert.gardner@worldnet.att.net> wrote:
> --> RV9-List message posted by: "ssss"
> <albert.gardner@worldnet.att.net>
>
> After 2-1/2 years N872RV has left the ground and
> now has 3.5 hours total.
> Flys great and so far performs very nice. Collecting
> data but mainly just
> having fun flying.
> Albert Gardner
> 9-0132
>
>
>
> Contributions
> any other
> Forums.
>
> latest messages.
> List members.
>
> http://www.matronics.com/subscription
> http://www.matronics.com/FAQ/RV9-List.htm
> Digests:http://www.matronics.com/digest/rv9-list
> http://www.matronics.com/archives
> http://www.matronics.com/photoshare
> http://www.matronics.com/emaillists
>
>
>
>
>
http://search.yahoo.com
Message 13
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> RV9-List message posted by: "Ralph Cloud" <ercouper@flash.net>
Congratulations!!!!
Ralph
wings
do not archive
> -----Original Message-----
> From: owner-rv9-list-server@matronics.com
> [mailto:owner-rv9-list-server@matronics.com]On Behalf Of ssss
> Sent: Thursday, April 17, 2003 7:42 PM
> To: rv9-list@matronics.com
> Subject: RV9-List: New 9A Flying
>
>
> --> RV9-List message posted by: "ssss" <albert.gardner@worldnet.att.net>
>
> After 2-1/2 years N872RV has left the ground and now has 3.5 hours total.
> Flys great and so far performs very nice. Collecting data but mainly just
> having fun flying.
> Albert Gardner
> 9-0132
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|