---------------------------------------------------------- RV9-List Digest Archive --- Total Messages Posted Sat 04/19/03: 3 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 01:48 PM - Static Source Location (JVonDolen@aol.com) 2. 02:50 PM - Re: Static Source Location (Gary) 3. 05:02 PM - need avionics guy on east coast (Welch, Ivo) ________________________________ Message 1 _____________________________________ Time: 01:48:59 PM PST US From: JVonDolen@aol.com Subject: RV9-List: Static Source Location --> RV9-List message posted by: JVonDolen@aol.com I'm unclear about where to drill the holes for my static ports. The sketch included with the static kit showed them just in front of the 707 bulkhead, yet the dwg showing all the skin rivet callouts shows them just foward of the 708 bulkhead. And I've seen it both places on actual RV's. I'm thinking it dosent't really matter but would like to hear from you gurus. Thanks, John Von Dohlen (about to start plumbing) ________________________________ Message 2 _____________________________________ Time: 02:50:20 PM PST US From: "Gary" Subject: Re: RV9-List: Static Source Location --> RV9-List message posted by: "Gary" John............Follow the drawings for your plane, not the static kit. The static kit is probably for all models, and may show the location for a 6 or something. It does matter. Van's went to a lot of trouble to find a good spot for the ports. On my -9A they are in front of the 708 bulkhead, near the shoulder harness cable attach points. Gary ----- Original Message ----- From: JVonDolen@aol.com To: rv9-list@matronics.com Sent: Saturday, April 19, 2003 2:48 PM Subject: RV9-List: Static Source Location --> RV9-List message posted by: JVonDolen@aol.com I'm unclear about where to drill the holes for my static ports. The sketch included with the static kit showed them just in front of the 707 bulkhead, yet the dwg showing all the skin rivet callouts shows them just foward of the 708 bulkhead. And I've seen it both places on actual RV's. I'm thinking it dosent't really matter but would like to hear from you gurus. Thanks, John Von Dohlen (about to start plumbing) --- Version: 6.0.471 / Virus Database: 269 - Release Date: 4/11/03 ________________________________ Message 3 _____________________________________ Time: 05:02:17 PM PST US From: "Welch, Ivo" Subject: RV9-List: need avionics guy on east coast --> RV9-List message posted by: "Welch, Ivo" hi guys: I think I have posted this once before, but I have definitely not solved my problem yet. I am planning on a panel revamp, and I need an affordable avionics installer on the east coast. (I am not the builder, and I have two left hands anyway.) The avionics are mostly already installed, though some need to be moved, and some need to be added. if you have someone to recommend, I would love to find out. thanks, /iaw PS: I am planning to replace my Catto prop with a Sensenich prop. I think my Catto prop is more of a climb prop right now. If Kevin is not going to have use for it in his next project, I will probably need to sell it in around July.