----------------------------------------------------------
                           RV9-List Digest Archive
                                      ---
                     Total Messages Posted Sun 04/20/03: 3
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 01:36 AM - Re: Nose wheel  (Steve Sampson)
     2. 01:36 AM - Re: Nose wheel  (Steve Sampson)
     3. 10:04 PM - Glide Ratio 9A  (Jim Hosie)
 
 
 
________________________________  Message 1  _____________________________________


Time: 01:36:54 AM PST US
From: "Steve Sampson" <SSampson.SLN21@london.edu>
Subject: RE: RV9-List: Nose wheel

--> RV9-List message posted by: "Steve Sampson" <SSampson.SLN21@london.edu>

Andy - thanks for that. I decided while I had it in bits to give it a light
etch prime. I think it is 'raw'. I will paint the outer faces later. Thanks,
Steve.

 -----Original Message-----
From:         owner-rv9-list-server@matronics.com
[mailto:owner-rv9-list-server@matronics.com]  On Behalf Of Andy Karmy
Subject:        Re: RV9-List: Nose wheel

--> RV9-List message posted by: "Andy Karmy" <andy@karmy.com>

I etched and primed the fork assembly, but left the actual nosewheel alone.
It seemed nice and shiny, but I'm not clear if it's protected or not.

- Andy

---------- Original Message ----------------------------------
From: "Steve Sampson" <SSampson.SLN21@london.edu>

>--> RV9-List message posted by: "Steve Sampson" <SSampson.SLN21@london.edu>
>
>What is good practice with the nosewheel? Does the interior need to be
>primed and the exterior primed and painted or is it in fact anodised?
>
>Thanks, Steve.
>
>






________________________________  Message 2  _____________________________________


Time: 01:36:54 AM PST US
From: "Steve Sampson" <SSampson.SLN21@london.edu>
Subject: RE: RV9-List: Nose wheel

--> RV9-List message posted by: "Steve Sampson" <SSampson.SLN21@london.edu>

I would be interested to know about the finish coatings you have found out
about Kevin? Thanks, Steve.

 -----Original Message-----
From:         owner-rv9-list-server@matronics.com
[mailto:owner-rv9-list-server@matronics.com]  On Behalf Of
Im7shannon@aol.com
Subject:        Re: RV9-List: Nose wheel

--> RV9-List message posted by: Im7shannon@aol.com

So your on the ground long enough to peck on a keyboard eh? Or do you have a
laptop in the cockpit now?
Have you started doing any paint work yet? I have been doing some research
on
finding or developing a good coating that will come out looking like
polished
aluminum. I could fill you in on my progress if youre interested.
Kevin
do not archive






________________________________  Message 3  _____________________________________


Time: 10:04:42 PM PST US
From: "Jim Hosie" <jhosie4@attbi.com>
Subject: RV9-List: Glide Ratio 9A

--> RV9-List message posted by: "Jim Hosie" <jhosie4@attbi.com>

HI,
Has anyone got the point of measuring the glide ratio of a 9A?
Thanks
Jim