----------------------------------------------------------
                           RV9-List Digest Archive
                                      ---
                     Total Messages Posted Fri 04/25/03: 4
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 06:07 AM - Wing root ribs  (Joe Wiza)
     2. 09:14 AM - Wing ribs  (Joe Wiza)
     3. 04:57 PM - instrument panel  (Peter Laurence)
     4. 07:57 PM - Re: instrument panel  (Andy Karmy)
 
 
 
________________________________  Message 1  _____________________________________


Time: 06:07:00 AM PST US
Subject: RV9-List: Wing root ribs
From: Joe Wiza <planejoel@juno.com>

--> RV9-List message posted by: Joe Wiza <planejoel@juno.com>

Has anyone had problems with the 911's that fit in the wing root.(The
wing step area) Ribs do not fit, they have to forced in leaving a slight
bow in the rib. They slide in ok on the rest of the spar. Its almost like
the flange of the spar is bent in. Any fix it ideas.

Joe RV9A wing 






________________________________  Message 2  _____________________________________


Time: 09:14:21 AM PST US
Subject: RV9-List: Wing ribs
From: Joe Wiza <planejoel@juno.com>

--> RV9-List message posted by: Joe Wiza <planejoel@juno.com>

Forget the wing root ribs Im looking at the left wing print while working
on the right wing (the rib R and L are switched around.  Geeeeees Ive got
a long way to go.

Joe Right wing RV9A






________________________________  Message 3  _____________________________________


Time: 04:57:27 PM PST US
From: Peter Laurence <plaurence@the-beach.net>
Subject: RV9-List: instrument panel

--> RV9-List message posted by: Peter Laurence <plaurence@the-beach.net>

Can anyone point me to the web site where one can "draw" an instrument panel.

There used to be one a while back.


Peter






________________________________  Message 4  _____________________________________


Time: 07:57:40 PM PST US
From: "Andy Karmy" <andy@karmy.com>
Subject: Re: RV9-List: instrument panel

--> RV9-List message posted by: "Andy Karmy" <andy@karmy.com>

http://www.epanelbuilder.com/

---------- Original Message ----------------------------------
From: Peter Laurence <plaurence@the-beach.net>

>--> RV9-List message posted by: Peter Laurence <plaurence@the-beach.net>
>
>Can anyone point me to the web site where one can "draw" an instrument panel.
>
>There used to be one a while back.
>
>
>Peter
>
>