---------------------------------------------------------- RV9-List Digest Archive --- Total Messages Posted Sun 06/22/03: 2 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 09:24 AM - Clecko-lock Cleckos (Pete Howell) 2. 10:37 AM - Re: Clecko-lock Cleckos (Mike Hoover) ________________________________ Message 1 _____________________________________ Time: 09:24:53 AM PST US From: "Pete Howell" Subject: RV9-List: Clecko-lock Cleckos --> RV9-List message posted by: "Pete Howell" Hello, I bought some used clecos (Clecko-lock) and I find that they will not fit in the pre punched holes, but will fit after they are drilled out to #30 or #40. Can I just use the scotchbrite wheel to shave a bit off the tip to make them fit? I don't think I should force them in. Cheers, Pete ________________________________ Message 2 _____________________________________ Time: 10:37:36 AM PST US From: "Mike Hoover" Subject: Re: RV9-List: Clecko-lock Cleckos --> RV9-List message posted by: "Mike Hoover" Pete, force them in. That's how mine fit. The clecoes are #30 or #40's (copper or silver color) so they fit when the holes are drilled with a #30 or #40 bit. The prepunch holes are just a bit smaller hole size. Mike SC 90709 (wing kit deposit mailed) ----- Original Message ----- From: "Pete Howell" Subject: RV9-List: Clecko-lock Cleckos > --> RV9-List message posted by: "Pete Howell" > > Hello, > > I bought some used clecos (Clecko-lock) and I find that they will not fit in > the pre punched holes, but will fit after they are drilled out to #30 or > #40. Can I just use the scotchbrite wheel to shave a bit off the tip to > make them fit? I don't think I should force them in. > > Cheers, > > Pete > >