Today's Message Index:
----------------------
1. 07:01 PM - Nutplate Question (Richard E. Tasker)
2. 07:26 PM - Re: Nutplate Question (Cy Galley)
3. 08:26 PM - Re: Nutplate Question (Richard E. Tasker)
Message 1
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Nutplate Question |
--> RV9-List message posted by: "Richard E. Tasker" <retasker@optonline.net>
I need a #6 or #8 nutplate that is smaller than the standard size.
Does anyone know what the rivet hole spacing is on the miniature
nutplates (MS21069 type)?
Thanks,
Dick Tasker, 90753
Waiting for Fuselage and working on the fiberglass tips
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Nutplate Question |
--> RV9-List message posted by: "Cy Galley" <cgalley@qcbc.org>
The MS21069-6 is .437
MS210169-8 is .469
MS210169-10 is .500
Cy Galley - Bellanca Champion Club
Newsletter Editor & EAA TC
www.bellanca-championclub.com
Actively supporting Aeroncas every day
Quarterly newsletters on time
Reasonable document reprints
1-518-731-6800
----- Original Message -----
From: "Richard E. Tasker" <retasker@optonline.net>
Subject: RV9-List: Nutplate Question
> --> RV9-List message posted by: "Richard E. Tasker"
<retasker@optonline.net>
>
> I need a #6 or #8 nutplate that is smaller than the standard size.
>
> Does anyone know what the rivet hole spacing is on the miniature
> nutplates (MS21069 type)?
>
> Thanks,
>
> Dick Tasker, 90753
> Waiting for Fuselage and working on the fiberglass tips
>
>
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Nutplate Question |
--> RV9-List message posted by: "Richard E. Tasker" <retasker@optonline.net>
Thanks, just what I needed to know :-) !
Dick Tasker
Do not archive
Cy Galley wrote:
>--> RV9-List message posted by: "Cy Galley" <cgalley@qcbc.org>
>
>The MS21069-6 is .437
>MS210169-8 is .469
>MS210169-10 is .500
>
>Cy Galley - Bellanca Champion Club
>Newsletter Editor & EAA TC
>www.bellanca-championclub.com
>Actively supporting Aeroncas every day
>Quarterly newsletters on time
>Reasonable document reprints
>1-518-731-6800
>
>----- Original Message -----
>From: "Richard E. Tasker" <retasker@optonline.net>
>Subject: RV9-List: Nutplate Question
>
>
>
>
>>--> RV9-List message posted by: "Richard E. Tasker"
>>
>>
><retasker@optonline.net>
>
>
>>I need a #6 or #8 nutplate that is smaller than the standard size.
>>
>>Does anyone know what the rivet hole spacing is on the miniature
>>nutplates (MS21069 type)?
>>
>>Thanks,
>>
>>Dick Tasker, 90753
>>Waiting for Fuselage and working on the fiberglass tips
>>
>>
>>
>>
>
>
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|