----------------------------------------------------------
                           RV9-List Digest Archive
                                      ---
                     Total Messages Posted Thu 07/10/03: 3
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 07:01 PM - Nutplate Question  (Richard E. Tasker)
     2. 07:26 PM - Re: Nutplate Question  (Cy Galley)
     3. 08:26 PM - Re: Nutplate Question  (Richard E. Tasker)
 
 
 
________________________________  Message 1  _____________________________________


Time: 07:01:42 PM PST US
From: "Richard E. Tasker" <retasker@optonline.net>
Subject: RV9-List: Nutplate Question

--> RV9-List message posted by: "Richard E. Tasker" <retasker@optonline.net>

I need a #6 or #8 nutplate that is smaller than the standard size.

Does anyone know what the rivet hole spacing is on the miniature 
nutplates (MS21069 type)?

Thanks,

Dick Tasker, 90753
Waiting for Fuselage and working on the fiberglass tips






________________________________  Message 2  _____________________________________


Time: 07:26:32 PM PST US
From: "Cy Galley" <cgalley@qcbc.org>
Subject: Re: RV9-List: Nutplate Question

--> RV9-List message posted by: "Cy Galley" <cgalley@qcbc.org>

The MS21069-6 is .437
MS210169-8 is .469
MS210169-10 is .500

Cy Galley - Bellanca Champion Club
Newsletter Editor & EAA TC
www.bellanca-championclub.com
Actively supporting Aeroncas every day
Quarterly newsletters on time
Reasonable document reprints
1-518-731-6800

----- Original Message -----
From: "Richard E. Tasker" <retasker@optonline.net>
Subject: RV9-List: Nutplate Question


> --> RV9-List message posted by: "Richard E. Tasker"
<retasker@optonline.net>
>
> I need a #6 or #8 nutplate that is smaller than the standard size.
>
> Does anyone know what the rivet hole spacing is on the miniature
> nutplates (MS21069 type)?
>
> Thanks,
>
> Dick Tasker, 90753
> Waiting for Fuselage and working on the fiberglass tips
>
>






________________________________  Message 3  _____________________________________


Time: 08:26:51 PM PST US
From: "Richard E. Tasker" <retasker@optonline.net>
Subject: Re: RV9-List: Nutplate Question

--> RV9-List message posted by: "Richard E. Tasker" <retasker@optonline.net>

Thanks, just what I needed to know :-) !

Dick Tasker

Do not archive


Cy Galley wrote:

>--> RV9-List message posted by: "Cy Galley" <cgalley@qcbc.org>
>
>The MS21069-6 is .437
>MS210169-8 is .469
>MS210169-10 is .500
>
>Cy Galley - Bellanca Champion Club
>Newsletter Editor & EAA TC
>www.bellanca-championclub.com
>Actively supporting Aeroncas every day
>Quarterly newsletters on time
>Reasonable document reprints
>1-518-731-6800
>
>----- Original Message -----
>From: "Richard E. Tasker" <retasker@optonline.net>
>Subject: RV9-List: Nutplate Question
>
>
>  
>
>>--> RV9-List message posted by: "Richard E. Tasker"
>>    
>>
><retasker@optonline.net>
>  
>
>>I need a #6 or #8 nutplate that is smaller than the standard size.
>>
>>Does anyone know what the rivet hole spacing is on the miniature
>>nutplates (MS21069 type)?
>>
>>Thanks,
>>
>>Dick Tasker, 90753
>>Waiting for Fuselage and working on the fiberglass tips
>>
>>
>>    
>>
>
>
>  
>