Today's Message Index:
----------------------
1. 12:17 PM - Re: Tip Up Canopy (Steve Sampson)
2. 09:49 PM - Congratulations Gary (Ken Moak)
Message 1
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> RV9-List message posted by: "Steve Sampson" <SSampson.SLN21@london.edu>
Dennis - I have just finished mine. Remember to work from the front - per
the instructions - after you have cut the lip (mold marks) off. VANS give
out all sorts of instructions as to when to split it. I was about 3/4" above
the role bar when I decided I had cut enough at the front. You need to take
a lot more off than you think but just work slowly. It's a nasty job, and
keep the dust out of you!
Steve
#90360
UK
-----Original Message-----
From: owner-rv9-list-server@matronics.com
[mailto:owner-rv9-list-server@matronics.com] On Behalf Of
DThomas773@aol.com
Subject: RV9-List: Tip Up Canopy
--> RV9-List message posted by: DThomas773@aol.com
Hi Folks,
A question to those who have already been there. I'm just starting to trim
the big bubble. How far do you go on the initial cut? I see the mold marks
around the perimeter and assume these have to go. Is this a good guide line
for
the first slice?
Dennis Thomas
Canopy
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Congratulations Gary |
--> RV9-List message posted by: Ken Moak <ken_moak@yahoo.com>
I dont know if anybody else needs motivation to keep
pounding rivets but if you do go to Gary Newsteds web
site and see the newest RV9 to become an airplane. I
understand he had the first flight today.
Congratulations Gary! Looks Great.
Ken
Wings
__________________________________
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|