Today's Message Index:
----------------------
1. 07:51 PM - Are you still out there? (DThomas773@aol.com)
2. 08:54 PM - Re: Are you still out there? (Ken Moak)
3. 09:22 PM - Re: Are you still out there? (Gary Newsted)
Message 1
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Are you still out there? |
--> RV9-List message posted by: DThomas773@aol.com
Hi Guys,
I'm writing this because I'm lonely. The site is very quiet these days. I
fear the active contributors have all finished thier planes and moved on.
I have about 15 hours work in my canopy frame and canopy. It was not as bad
as I expected it to be but none the less a challenge. I have yet to do the
final trim on the rear window and then it's time to decide where to go next. I
think once the canopy (tip up ) and rear window are finished I will lay out
the panel and start at the engine mount.
I made one mistake that cost me a bit of time. When we riveted the top skins
on the rear of the fuselage we went all the way to the rear of the cabin.
The instructions, (which I neglected to study ahead) tell you to rivet the
forward top, just aft of the cabin, on afte the rear window ias fitted. It still
worked out.
Dennis Thomas
RV-9 taildragger
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Are you still out there? |
--> RV9-List message posted by: Ken Moak <ken_moak@yahoo.com>
You are right it has been quiet. I'm afraid most have
gone to the Yahoo Group. Since I joined it I have
started getting all kinds of spam, go figure.
I'm just getting on the wings so I'm no help.
Are you going to Oshkosh, I'm sure it is a little
quiet as people prepare for the flyin.
Ken
Wings
do not archive
--- DThomas773@aol.com wrote:
> --> RV9-List message posted by: DThomas773@aol.com
>
> Hi Guys,
> I'm writing this because I'm lonely. The site is
> very quiet these days. I
> fear the active contributors have all finished thier
> planes and moved on.
> I have about 15 hours work in my canopy frame and
> canopy. It was not as bad
> as I expected it to be but none the less a
> challenge. I have yet to do the
> final trim on the rear window and then it's time to
> decide where to go next. I
> think once the canopy (tip up ) and rear window are
> finished I will lay out
> the panel and start at the engine mount.
> I made one mistake that cost me a bit of time. When
> we riveted the top skins
> on the rear of the fuselage we went all the way to
> the rear of the cabin.
> The instructions, (which I neglected to study ahead)
> tell you to rivet the
> forward top, just aft of the cabin, on afte the rear
> window ias fitted. It still
> worked out.
> Dennis Thomas
> RV-9 taildragger
>
>
>
> Contributions
> any other
> Forums.
>
> latest messages.
> List members.
>
> http://www.matronics.com/subscription
> http://www.matronics.com/FAQ/RV9-List.htm
> http://www.matronics.com/archives
> http://www.matronics.com/photoshare
> http://www.matronics.com/emaillists
>
>
>
>
>
__________________________________
http://sitebuilder.yahoo.com
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Are you still out there? |
--> RV9-List message posted by: "Gary Newsted" <fcs@jlc.net>
Well I'll liven it up a little.... I've now logged 32 hours of rigorous
flight testing in nine days! 8 more to go before departing for Oshkosh on
monday. No sweat. Flown for hours at 10.5K, behind storms, high winds, and
great sunsets. She's performed flawlessly. I find myself with nothing more
to do but squirt it with polish and rub off the bugs. You're going to love
your 9's
Hope to see some familiar names and faces at Airventure!
Gary
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|