----------------------------------------------------------
                           RV9-List Digest Archive
                                      ---
                     Total Messages Posted Wed 07/30/03: 2
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 07:42 AM - Re: Fuel Vent Screens  (Phil Birkelbach)
     2. 07:43 AM - Re: [ Jim Cone ] : New Email List Photo Share Available!  (JOHN KERR)
 
 
 
________________________________  Message 1  _____________________________________


Time: 07:42:05 AM PST US
From: "Phil Birkelbach" <phil@petrasoft.net>
Subject: Re: RV9-List: Fuel Vent Screens

--> RV9-List message posted by: "Phil Birkelbach" <phil@petrasoft.net>

I went to the store and bought a couple of those little washers that you put
in your garden hose that have the little stainless steel mesh on them.  I
cut them to fit the vents and then used JB Weld to stick them on.  I think
they will be pretty durable.  Here is a picture...

http://www.myrv7.com/viewlog.php?rangestart=335&rangeend=335


Godspeed,

Phil Birkelbach - Houston Texas
RV-7 N727WB (Reserved) - Canopy
http://www.myrv7.com

----- Original Message -----
From: "Leland" <Federigo@pacbell.net>
Subject: RV9-List: Fuel Vent Screens


> --> RV9-List message posted by: Leland <Federigo@pacbell.net>
>
> Using Proseal, I glued aluminum window screen over my fuel vents as
> suggested by Van's, but both sides have been damaged even though my
> project is still in the garage. The dog's running under it may have
> dislodged at least one of the screens. Does anybody have something more
> durable to put over those vents? I've read that screen is needed to keep
> insects from entering and plugging up the lines.
>
>






________________________________  Message 2  _____________________________________


Time: 07:43:16 AM PST US
From: JOHN KERR <kerrjohna@comcast.net>
Subject: Re: RV9-List: [ Jim Cone ] : New Email List Photo Share Available!

--> RV9-List message posted by: JOHN KERR <kerrjohna@comcast.net>

Jim Cone,
Great pix and sounds like a great way to do the trailing edges.

'nother question. describe the method you used to remove the film from 
the skin without scratching the surface.

John kerr


----- Original Message -----
From: Email List Photo Shares <pictures@matronics.com>
Subject: RV9-List: [ Jim Cone ] : New Email List Photo Share Available!

> --> RV9-List message posted by: Email List Photo Shares 
> <pictures@matronics.com>
> 
> A new Email List Photo Share is available:
> 
>        Poster:  Jim Cone <jimnbev@olypen.com>
> 
> List,RV9-List,RV10-List
> 
>        Subject: Nice Straight Edge...
> 
>        
> 
http://www.matronics.com/photoshare/jimnbev@olypen.com.07.29.2003/index.
html
> 
>    o Main Photo Share Index
> 
>        http://www.matronics.com/photoshare
> 
>    o Submitting a Photo Share
> 
>        If you wish to submit a Photo Share of your own, please 
> include the 
>        following information along with your email message and files:
> 
>                1) Email List or Lists that they are related to:
>                2) Your Full Name:
>                3) Your Email Address:
>                4) One line Subject description:
>                5) Multi-line, multi-paragraph description of topic:
>                6) One-line Description of each photo or file:
> 
>        Email the information above and your files and photos to:
> 
>                pictures@matronics.com
> 
> 
> _-
> 
======================================================================_-
=              - The RV9-List Email Forum -
> _-
> 
======================================================================_-
= !! NEWish !!
> _-
> 
======================================================================_-
= List Related Information
> _-
> ======================================================================
> 
> 
> 
>