----------------------------------------------------------
                           RV9-List Digest Archive
                                      ---
                     Total Messages Posted Fri 08/01/03: 4
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 08:39 AM - Dynafocal Mounts  (Dale Larsen)
     2. 09:23 AM - Re: Dynafocal Mounts  (Phil Birkelbach)
     3. 09:35 AM - Re: Dynafocal Mounts  (Andy Karmy)
     4. 04:09 PM - Re: Dynafocal Mounts  (Dale Larsen)
 
 
 
________________________________  Message 1  _____________________________________


Time: 08:39:33 AM PST US
From: "Dale Larsen" <slickrock@been-there.com>
Subject: RV9-List: Dynafocal Mounts

--> RV9-List message posted by: "Dale Larsen" <slickrock@been-there.com>

Help!
I lost the instructions for the Lord mounts on the 0-320.  There are two
seperate rubber mounts, one is smooth, while the other is stepped.  Which
one goes on the engine side?

Thanks,

Dale






________________________________  Message 2  _____________________________________


Time: 09:23:15 AM PST US
From: "Phil Birkelbach" <phil@petrasoft.net>
Subject: Re: RV9-List: Dynafocal Mounts

--> RV9-List message posted by: "Phil Birkelbach" <phil@petrasoft.net>

The one that is stepped is the hard one.  It goes in compression.  Which
means it is away from the engine on top and between the engine and the mount
on the bottom.  There should be an extra washer for the bottom and if I
remember correctly it goes behind the bolt head and the big washer that came
with the rubber mounts should go between the engine and the hard mount on
bottom.  Think of it like this.  The big washer should be what applies the
compression forces to the hard rubber mount.  The bottom mounts use the
longer bolts and the top mounts use the shorter bolts.

Godspeed,

Phil Birkelbach - Houston Texas
RV-7 N727WB (Reserved) - Canopy
http://www.myrv7.com

----- Original Message -----
From: "Dale Larsen" <slickrock@been-there.com>
Subject: RV9-List: Dynafocal Mounts


> --> RV9-List message posted by: "Dale Larsen" <slickrock@been-there.com>
>
> Help!
> I lost the instructions for the Lord mounts on the 0-320.  There are two
> seperate rubber mounts, one is smooth, while the other is stepped.  Which
> one goes on the engine side?
>
> Thanks,
>
> Dale
>
>






________________________________  Message 3  _____________________________________


Time: 09:35:53 AM PST US
From: "Andy Karmy" <andy@karmy.com>
Subject: Re: RV9-List: Dynafocal Mounts

--> RV9-List message posted by: "Andy Karmy" <andy@karmy.com>

It depends on the location...

One of the mounts is stiffer than the other, you put the stiffer one under the
weight of the engine. So they go on the top of the top bolts and against the engine
on the bottom.

Here's a great link with all the instructions as to how to mount an engine!

http://new.metronet.com/~dreeves/articles/IllustratedGuideToEngineHanging/enginehanging.htm

- Andy

---------- Original Message ----------------------------------
From: "Dale Larsen" <slickrock@been-there.com>

>--> RV9-List message posted by: "Dale Larsen" <slickrock@been-there.com>
>
>Help!
>I lost the instructions for the Lord mounts on the 0-320.  There are two
>seperate rubber mounts, one is smooth, while the other is stepped.  Which
>one goes on the engine side?
>
>Thanks,
>
>Dale
>
>






________________________________  Message 4  _____________________________________


Time: 04:09:34 PM PST US
From: "Dale Larsen" <slickrock@been-there.com>
Subject: Re: RV9-List: Dynafocal Mounts

--> RV9-List message posted by: "Dale Larsen" <slickrock@been-there.com>

Thanks Phil and Andy.