----------------------------------------------------------
                           RV9-List Digest Archive
                                      ---
                     Total Messages Posted Fri 08/22/03: 3
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 11:50 AM - Re: RV9-List Digest: firewall insulation  (Bobdeva@aol.com)
     2. 12:52 PM - Re: Re: RV9-List Digest: firewall insulation  (Ralph Cloud)
     3. 01:02 PM - ACS2002 and manifold pressure  (Steve Sampson)
 
 
 
________________________________  Message 1  _____________________________________


Time: 11:50:46 AM PST US
From: Bobdeva@aol.com
Subject: RV9-List: Re: RV9-List Digest: firewall insulation

--> RV9-List message posted by: Bobdeva@aol.com

I bought all my sound and heat insulation for Skandia-inc.com.   Large 
selection, all fire-coded and FAA approved.  Not cheap, but like a lot of things,

you get what you pay for.  Also bought my Confor for the seats there.
Bob Devaney






________________________________  Message 2  _____________________________________


Time: 12:52:28 PM PST US
From: "Ralph Cloud" <rv9ralph@flash.net>
Subject: RE: RV9-List: Re: RV9-List Digest: firewall insulation

--> RV9-List message posted by: "Ralph Cloud" <rv9ralph@flash.net>

For more information on soundproofing, check this website.  It is a
storehouse of information

http://www.soundproofing.org/

Ralph
Livermore
Wings


> -----Original Message-----
> From: owner-rv9-list-server@matronics.com
> [mailto:owner-rv9-list-server@matronics.com]On Behalf Of Bobdeva@aol.com
> Sent: Friday, August 22, 2003 11:49 AM
> To: rv9-list@matronics.com
> Subject: RV9-List: Re: RV9-List Digest: firewall insulation
>
>
> --> RV9-List message posted by: Bobdeva@aol.com
>
> I bought all my sound and heat insulation for Skandia-inc.com.   Large
> selection, all fire-coded and FAA approved.  Not cheap, but like
> a lot of things,
> you get what you pay for.  Also bought my Confor for the seats there.
> Bob Devaney
>
>






________________________________  Message 3  _____________________________________


Time: 01:02:01 PM PST US
From: "Steve Sampson" <SSampson.SLN21@london.edu>
Subject: RV9-List: ACS2002 and manifold pressure

--> RV9-List message posted by: "Steve Sampson" <SSampson.SLN21@london.edu>

Can anyone tell me if the manifold pressure sensor on the ACS2002 is in the
instrument or can be mounted remotely?

The reason for this is that I am not sure if I need to install the manifold
pressure pipe from the engine to the firewall included in the FWF kit or
not. It would be easiest to take a transducer to a cylinder but perhaps that
is not how it works. Also, is the ACS2002 typical of these engine monitors?
I havnt yet made a final decision as to instrumentation though the ACS is
the way I am leaning.

Thanks, Steve.

#90360
Finish and FWF
UK