----------------------------------------------------------
                           RV9-List Digest Archive
                                      ---
                     Total Messages Posted Sat 10/04/03: 2
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 02:37 PM - [ Jerry Calvert ] : New Email List Photo Share Available!  (Email List Photo Shares)
     2. 08:16 PM - Re: HS skin fit  (Paul Eastham)
 
 
 
________________________________  Message 1  _____________________________________


Time: 02:37:02 PM PST US
Subject: RV9-List: [ Jerry Calvert ] : New Email List Photo Share Available!
From: Email List Photo Shares <pictures@matronics.com>

--> RV9-List message posted by: Email List Photo Shares <pictures@matronics.com>


A new Email List Photo Share is available:

        Poster:  Jerry Calvert <rv6@cox.net>


        Subject: Oil Door

        http://www.matronics.com/photoshare/rv6@cox.net.10.04.2003/index.html


    o Main Photo Share Index

        http://www.matronics.com/photoshare

    o Submitting a Photo Share

        If you wish to submit a Photo Share of your own, please include the 
        following information along with your email message and files:

                1) Email List or Lists that they are related to:
                2) Your Full Name:
                3) Your Email Address:
                4) One line Subject description:
                5) Multi-line, multi-paragraph description of topic:
                6) One-line Description of each photo or file:

        Email the information above and your files and photos to:

                pictures@matronics.com






________________________________  Message 2  _____________________________________


Time: 08:16:09 PM PST US
From: Paul Eastham <abstraction@yahoo.com>
Subject: RV9-List: Re: HS skin fit

--> RV9-List message posted by: Paul Eastham <abstraction@yahoo.com>

Regarding the tight-fitting HS skin...

Dennis guessed right, here is a reply from Van's for the record:

The skeleton is a pretty tight fit in the skin, you will need to remove
the vinyl from the skin and the spars to get the holes to line up. In
addition, it may be necessary to adjust the rib profile very slightly,
especially around the front to get the holes lined up. Using some
light grease on the ribs can also help the skin slide across them
more easily, and avoid scratching the skin.

<snip>

Sure wish they had put that in the manual. It clearly says it is ok to leave
the skin on during drilling. 

__________________________________