----------------------------------------------------------
                           RV9-List Digest Archive
                                      ---
                     Total Messages Posted Fri 10/24/03: 3
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 10:53 AM - Baffles & Plenum  (Steve Sampson)
     2. 02:03 PM - Re: Cowl fitting  (Joe Wiza)
     3. 09:41 PM - Re: Baffles & Plenum  (Ralph Cloud)
 
 
 
________________________________  Message 1  _____________________________________


Time: 10:53:15 AM PST US
From: "Steve Sampson" <SSampson.SLN21@london.edu>
Subject: RV9-List: Baffles & Plenum

--> RV9-List message posted by: "Steve Sampson" <SSampson.SLN21@london.edu>

Has anyone built an aluminium plenum rather than use the rubbers to
interface the baffles to the upper cowl? It does not look as though it would
be too hard to do. Thoughts?

Steve
#90360
UK






________________________________  Message 2  _____________________________________


Time: 02:03:45 PM PST US
Subject: Re: RV9-List: Cowl fitting
From: Joe Wiza <planejoel@juno.com>

--> RV9-List message posted by: Joe Wiza <planejoel@juno.com>

Steve, how much space between the camlocks, 

Joe RV9A

On Thu, 23 Oct 2003 15:15:40 +0100 "Steve Sampson"
<SSampson.SLN21@london.edu> writes:
> --> RV9-List message posted by: "Steve Sampson" 
> <SSampson.SLN21@london.edu>
> 
> Joe, I have a friend with a -6 with Camlocks in the UK. He is 
> pleased with
> it, though I gather he has some 'bulging' in flight between the 
> Camlocks. He
> swears by them. I am using hinges. Anything you want me to ask him? 
> Steve.
> 
> 
>
=
>
=
>
=
>
=
> 
> 
> 
> 
> 
> 






________________________________  Message 3  _____________________________________


Time: 09:41:03 PM PST US
From: "Ralph Cloud" <rv9ralph@flash.net>
Subject: RE: RV9-List: Baffles & Plenum

--> RV9-List message posted by: "Ralph Cloud" <rv9ralph@flash.net>

Check the archives. I seem to remember something on the photo post of an
aluminum (or aluminium) plenum

Ralph
wings... kinda
Livermore, CA
do no archive

> -----Original Message-----
> From: owner-rv9-list-server@matronics.com
> [mailto:owner-rv9-list-server@matronics.com]On Behalf Of Steve Sampson
> Sent: Friday, October 24, 2003 11:01 AM
> To: rv9-list@matronics.com
> Subject: RV9-List: Baffles & Plenum
>
>
> --> RV9-List message posted by: "Steve Sampson"
> <SSampson.SLN21@london.edu>
>
> Has anyone built an aluminium plenum rather than use the rubbers to
> interface the baffles to the upper cowl? It does not look as
> though it would
> be too hard to do. Thoughts?
>
> Steve
> #90360
> UK
>
>