Today's Message Index:
----------------------
1. 10:27 AM - Re: Cowl fitting (Steve Sampson)
2. 09:09 PM - 1/4" - 28 Threaded Shank Drill Bits / Scotch-Brite Wheels - 40% SAVINGS (Garey Wittich)
Message 1
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> RV9-List message posted by: "Steve Sampson" <SSampson.SLN21@london.edu>
Joe - I spoke to the guy with the camlocks today. He said the upper to lower
cowl join each side had 9 camlocks. He guessed the spacing was 4 or 5
inches, but 9 evenly spaced. The vertical seams have similar spacing. He did
say reinforce the edges with a minimum of two layers of glass.
Regards, Steve
#90360
-----Original Message-----
From: owner-rv9-list-server@matronics.com
[mailto:owner-rv9-list-server@matronics.com]On Behalf Of Joe Wiza
Subject: Re: RV9-List: Cowl fitting
--> RV9-List message posted by: Joe Wiza <planejoel@juno.com>
Steve, how much space between the camlocks,
Joe RV9A
On Thu, 23 Oct 2003 15:15:40 +0100 "Steve Sampson"
<SSampson.SLN21@london.edu> writes:
> --> RV9-List message posted by: "Steve Sampson"
> <SSampson.SLN21@london.edu>
>
> Joe, I have a friend with a -6 with Camlocks in the UK. He is
> pleased with
> it, though I gather he has some 'bulging' in flight between the
> Camlocks. He
> swears by them. I am using hinges. Anything you want me to ask him?
> Steve.
>
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | 1/4" - 28 Threaded Shank Drill Bits / Scotch-Brite Wheels - |
40% SAVINGS
rv8-list@matronics.com, rv9-list@matronics.com
--> RV9-List message posted by: Garey Wittich <gareywittich2000@yahoo.com>
FOR YOUR BUILDING NEEDS:
1) 1/4"-28 THREADED SHANK DRILL BITS, Size #40
NEW
* Used with Angle Air Drills and Flexible
Drill Attachments, etc.
* NEW from Northrup / Grumman Aircraft Co.
* 2 1/8" Long, 135 Degree Split Point, High
Speed Steel
* YOUR PRICE $1.50 each (Avery Part #4140,
$2.70 each)
2) NAS907 Type B Drill Bits, Size #30 NEW
* High Speed, Nitride Oxide coated for
enhanced abrasion resistance
* Recommended for Stainless Steel, hard
Steel, Titanium, etc.
* NEW from Northrup / Grumman Aircraft Co.
* 135 degree Split Point
* 2 3/4" long
* YOUR PRICE $1.00 each
3) DEBURRING WHEEL (aka Scotch Brite Wheel)
* NEW from Northrup / Grumman Aircraft Co.
* Used to Radius, Deburr & Smooth edges on
Aluminum parts using a Die Grinder, etc.
* 7A Medium Grit, Aluminum Oxide
(The "ONE" recommended by Van's Aircraft)
* 1" dia x 1" high with 3/16" hole for
Mandrel (Mandrel not supplied)
* YOUR PRICE $3.25 each (Avery Part #3700,
$5.00 each)
Minimum Order $10.00 POSTAGE INCLUDED
Indicate interest OFF LINE by E-Mail. Supplies
Limited
__________________________________
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|