----------------------------------------------------------
                           RV9-List Digest Archive
                                      ---
                     Total Messages Posted Thu 10/30/03: 2
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 10:27 AM - Re: Cowl fitting  (Steve Sampson)
     2. 09:09 PM - 1/4" - 28 Threaded Shank Drill Bits / Scotch-Brite Wheels - 40% SAVINGS  (Garey Wittich)
 
 
 
________________________________  Message 1  _____________________________________


Time: 10:27:21 AM PST US
From: "Steve Sampson" <SSampson.SLN21@london.edu>
Subject: RE: RV9-List: Cowl fitting

--> RV9-List message posted by: "Steve Sampson" <SSampson.SLN21@london.edu>

Joe - I spoke to the guy with the camlocks today. He said the upper to lower
cowl join each side had 9 camlocks. He guessed the spacing was 4 or 5
inches, but 9 evenly spaced. The vertical seams have similar spacing. He did
say reinforce the edges with a minimum of two layers of glass.

Regards, Steve
#90360

-----Original Message-----
From: owner-rv9-list-server@matronics.com
[mailto:owner-rv9-list-server@matronics.com]On Behalf Of Joe Wiza
Subject: Re: RV9-List: Cowl fitting


--> RV9-List message posted by: Joe Wiza <planejoel@juno.com>

Steve, how much space between the camlocks,

Joe RV9A

On Thu, 23 Oct 2003 15:15:40 +0100 "Steve Sampson"
<SSampson.SLN21@london.edu> writes:
> --> RV9-List message posted by: "Steve Sampson"
> <SSampson.SLN21@london.edu>
>
> Joe, I have a friend with a -6 with Camlocks in the UK. He is
> pleased with
> it, though I gather he has some 'bulging' in flight between the
> Camlocks. He
> swears by them. I am using hinges. Anything you want me to ask him?
> Steve.
>






________________________________  Message 2  _____________________________________


Time: 09:09:04 PM PST US
From: Garey Wittich <gareywittich2000@yahoo.com>
Subject: RV9-List: 1/4" - 28 Threaded Shank Drill Bits / Scotch-Brite Wheels -
40% SAVINGS
   rv8-list@matronics.com, rv9-list@matronics.com

--> RV9-List message posted by: Garey Wittich <gareywittich2000@yahoo.com>

FOR YOUR BUILDING NEEDS:

1)  1/4"-28 THREADED SHANK DRILL BITS, Size #40  
    NEW
     * Used with Angle Air Drills and Flexible 
       Drill Attachments, etc.
     * NEW from Northrup / Grumman Aircraft Co.
     * 2 1/8" Long, 135 Degree Split Point, High 
       Speed Steel
     * YOUR PRICE $1.50 each  (Avery Part #4140,
                                  $2.70 each)

2)  NAS907 Type B Drill Bits, Size #30  NEW
     *  High Speed, Nitride Oxide coated for 
        enhanced abrasion resistance
     *  Recommended for Stainless Steel, hard 
        Steel, Titanium, etc.
     *  NEW from Northrup / Grumman Aircraft Co.
     *  135 degree Split Point
     *  2 3/4" long
     *  YOUR PRICE $1.00 each

3) DEBURRING WHEEL (aka Scotch Brite Wheel)
     *  NEW from Northrup / Grumman Aircraft Co.
     *  Used to Radius, Deburr & Smooth edges on   
        Aluminum parts using a Die Grinder, etc.
     *  7A Medium Grit, Aluminum Oxide 
        (The "ONE" recommended by Van's Aircraft)
     *  1" dia x 1" high with 3/16" hole for 
        Mandrel  (Mandrel not supplied)
     * YOUR PRICE $3.25 each   (Avery Part #3700, 
                                 $5.00 each)

Minimum Order $10.00  POSTAGE INCLUDED

Indicate interest OFF LINE by E-Mail.  Supplies    
   Limited


__________________________________