---------------------------------------------------------- RV9-List Digest Archive --- Total Messages Posted Wed 01/21/04: 4 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 08:23 AM - Re: Current Draw (rv9@3rivers.net) 2. 08:55 AM - all electric panel (kerrjohna@comcast.net) 3. 09:50 AM - Re: all electric panel (Noel & Yoshie Simmons) 4. 11:04 AM - Re: all electric panel (kerrjohna@comcast.net) ________________________________ Message 1 _____________________________________ Time: 08:23:46 AM PST US From: rv9@3rivers.net Subject: Re: RV9-List: Current Draw TO_ADDRESS_EQ_REAL --> RV9-List message posted by: rv9@3rivers.net Hi, Steve. When I was building, I measured the current to run them at 1 1/2 amps for the fuel pump, and 1 amp for the flaps with no load.....No fuel in the lines. I tried putting a load on the flaps with my hand, and it went up to about 2 amps. Non-scientific. I used fuses of 5 amps for each of them. It has worked fine, even when I misbehaved by lowering the flaps at 110 mph. Gary Quoting Steve Sampson : > --> RV9-List message posted by: "Steve Sampson" > > Anyone know what the current draw on the flap motor and the Facit fuel pump > is? Thanks, Steve. > > RV9a > Engine plumbing & FF electrics > ________________________________ Message 2 _____________________________________ Time: 08:55:09 AM PST US From: kerrjohna@comcast.net Subject: RV9-List: all electric panel --> RV9-List message posted by: kerrjohna@comcast.net the current RViator listed several "all electric" panels. being in the thinking mode about my panel and planning to use the Dynon 10 EFIS any pictures that lister could provide will be helpful. ________________________________ Message 3 _____________________________________ Time: 09:50:17 AM PST US From: "Noel & Yoshie Simmons" Subject: RE: RV9-List: all electric panel --> RV9-List message posted by: "Noel & Yoshie Simmons" Take a look at my www.blueskyaviation.net I have several panels with the Dynon and BMA EFIS 1, soon to have the GRT EFIS. By the way, when in doubt go with the CNX-80 GPS/COM what a great radio, the best I have ever installed - bar none. Noel -----Original Message----- From: owner-rv9-list-server@matronics.com [mailto:owner-rv9-list-server@matronics.com]On Behalf Of kerrjohna@comcast.net Subject: RV9-List: all electric panel --> RV9-List message posted by: kerrjohna@comcast.net the current RViator listed several "all electric" panels. being in the thinking mode about my panel and planning to use the Dynon 10 EFIS any pictures that lister could provide will be helpful. ________________________________ Message 4 _____________________________________ Time: 11:04:07 AM PST US From: kerrjohna@comcast.net Subject: RE: RV9-List: all electric panel --> RV9-List message posted by: kerrjohna@comcast.net thanks noel > --> RV9-List message posted by: "Noel & Yoshie Simmons" > > > Take a look at my www.blueskyaviation.net I have several panels with the > Dynon and BMA EFIS 1, soon to have the GRT EFIS. By the way, when in doubt > go with the CNX-80 GPS/COM what a great radio, the best I have ever > installed - bar none. > > Noel > > -----Original Message----- > From: owner-rv9-list-server@matronics.com > [mailto:owner-rv9-list-server@matronics.com]On Behalf Of > kerrjohna@comcast.net > To: rv9- list > Subject: RV9-List: all electric panel > > > --> RV9-List message posted by: kerrjohna@comcast.net > > the current RViator listed several "all electric" panels. being in the > thinking mode about my panel and planning to use the Dynon 10 EFIS any > pictures that lister could provide will be helpful. > > > > > >