Today's Message Index:
----------------------
1. 07:06 PM - Longeron Bending Drawing (Steve Mottin)
2. 08:45 PM - Re: Longeron Bending Drawing (Paul Pflimlin)
3. 08:45 PM - Re: Longeron Bending Drawing (Vic Jacko)
4. 09:10 PM - Annual Maintenance Manual (DThomas773@aol.com)
5. 10:20 PM - Re: Annual Maintenance Manual (Roger Ping)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Longeron Bending Drawing |
--> RV9-List message posted by: Steve Mottin <rv9@charter.net>
I'm feeling really dumb right now. I've finished all of my bulkheads
for the fuselage of my RV-9A and today I marked and cut the longerons
and I cut all of my J-stringers. I was getting ready to begin the
bending process when I discovered that I did not have either drawing
17 or drawing 17A which have the bending template on them. I of
course, do have them in my preview plans but they are not to scale for
bending.
Now my question to someone who's already been there. Are drawings 17
and 17A the same size as all of the other drawing or were they larger?
I have this nagging feeling that these drawings were larger than my
easel board and that I put them up somewhere for safe keeping. If
that's true, I need to keep looking for wherever that safe place is. If
they are regular sized I would have had no reason not to put them on
the easel with the rest of the drawings and I must have not received
them with my fuselage kit.
Somebody help please, before I tear the house and the hangar totally
apart looking for these drawings.
Thanks,
Steve Mottin
Granbury, Texas
RV-9A Fuselage - Longerons (Maybe?)
N609RV Reserved
DO NOT ARCHIVE
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Longeron Bending Drawing |
--> RV9-List message posted by: "Paul Pflimlin" <pablo@phonewave.net>
----- Original Message -----
From: "Steve Mottin" <rv9@charter.net>
Subject: RV9-List: Longeron Bending Drawing
> --> RV9-List message posted by: Steve Mottin <rv9@charter.net>
>
They are larger and in a safe place. When you find that safe place there
may be some of the things that I put there and can't find. Good luck!
>
> I'm feeling really dumb right now. I've finished all of my bulkheads
> for the fuselage of my RV-9A and today I marked and cut the longerons
> and I cut all of my J-stringers. I was getting ready to begin the
> bending process when I discovered that I did not have either drawing
> 17 or drawing 17A which have the bending template on them. I of
> course, do have them in my preview plans but they are not to scale for
> bending.
>
> Now my question to someone who's already been there. Are drawings 17
> and 17A the same size as all of the other drawing or were they larger?
>
> I have this nagging feeling that these drawings were larger than my
> easel board and that I put them up somewhere for safe keeping. If
> that's true, I need to keep looking for wherever that safe place is. If
> they are regular sized I would have had no reason not to put them on
> the easel with the rest of the drawings and I must have not received
> them with my fuselage kit.
>
> Somebody help please, before I tear the house and the hangar totally
> apart looking for these drawings.
>
> Thanks,
>
> Steve Mottin
> Granbury, Texas
> RV-9A Fuselage - Longerons (Maybe?)
> N609RV Reserved
>
> DO NOT ARCHIVE
>
>
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Longeron Bending Drawing |
--> RV9-List message posted by: "Vic Jacko" <vicwj@earthlink.net>
Steve, I have the 17 and 17a in both the small and blown-up versions. I
think they came with the kit.
vic
----- Original Message -----
From: "Steve Mottin" <rv9@charter.net>
Subject: RV9-List: Longeron Bending Drawing
> --> RV9-List message posted by: Steve Mottin <rv9@charter.net>
>
>
> I'm feeling really dumb right now. I've finished all of my bulkheads
> for the fuselage of my RV-9A and today I marked and cut the longerons
> and I cut all of my J-stringers. I was getting ready to begin the
> bending process when I discovered that I did not have either drawing
> 17 or drawing 17A which have the bending template on them. I of
> course, do have them in my preview plans but they are not to scale for
> bending.
>
> Now my question to someone who's already been there. Are drawings 17
> and 17A the same size as all of the other drawing or were they larger?
>
> I have this nagging feeling that these drawings were larger than my
> easel board and that I put them up somewhere for safe keeping. If
> that's true, I need to keep looking for wherever that safe place is. If
> they are regular sized I would have had no reason not to put them on
> the easel with the rest of the drawings and I must have not received
> them with my fuselage kit.
>
> Somebody help please, before I tear the house and the hangar totally
> apart looking for these drawings.
>
> Thanks,
>
> Steve Mottin
> Granbury, Texas
> RV-9A Fuselage - Longerons (Maybe?)
> N609RV Reserved
>
> DO NOT ARCHIVE
>
>
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Annual Maintenance Manual |
--> RV9-List message posted by: DThomas773@aol.com
Hi Guys,
I know if we build the things we should be smart enough to do an annual on
them. However, I'm a by the numbers,step #1, step #2 etc, kind of person. I'm
more comfortable with a book or list or someone to tell me just what needs to
be done.
Is there a generic guideline out there somewhere?
Ken Scott said to go to the Van's Air Force sight by Reeves, but I don't find
anything there and they don't return my emails.
Appreciate any input.
Dennis Thomas
RV9 flying, until it went to the paint shop.
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Annual Maintenance Manual |
--> RV9-List message posted by: "Roger Ping" <rpping@qwest.net>
Look at FAR Part 43 appendix D.
-----Original Message-----
From: owner-rv9-list-server@matronics.com
[mailto:owner-rv9-list-server@matronics.com] On Behalf Of
DThomas773@aol.com
Subject: RV9-List: Annual Maintenance Manual
--> RV9-List message posted by: DThomas773@aol.com
Hi Guys,
I know if we build the things we should be smart enough to do an annual
on
them. However, I'm a by the numbers,step #1, step #2 etc, kind of
person. I'm
more comfortable with a book or list or someone to tell me just what
needs to
be done.
Is there a generic guideline out there somewhere?
Ken Scott said to go to the Van's Air Force sight by Reeves, but I don't
find
anything there and they don't return my emails.
Appreciate any input.
Dennis Thomas
RV9 flying, until it went to the paint shop.
==
==
==
==
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|