Today's Message Index:
----------------------
1. 12:39 PM - Re: center section conduit holes (Terry Hobert)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | center section conduit holes |
--> RV9-List message posted by: "Terry Hobert" <terhobey@hotmail.com>
I enlarged mine also and I remember the plans saying to modify the bushing
because the sections would interfere. If those are the same holes you are
talking about. I trimed out the bushings and put them in. I have to admit
it did seem alittle funky and I am learning to read and study carefully
before jumping in. There are some mistakes and Vans does fix them
(sometimes), but I've also found to read the web sites and look for the
areas I need to watch out for. You are probably doing that already, I bet!
Small price to pay for a great airplane however!
Keep on Brother,
Terry Hobert 9A fuselage
>From: Paul Eastham <eastham@netapp.com>
>Reply-To: rv9-list@matronics.com
>To: rv9-list@matronics.com
>Subject: RV9-List: center section conduit holes
>Date: Sun, 18 Apr 2004 18:15:55 -0700
>
>--> RV9-List message posted by: Paul Eastham <eastham@netapp.com>
>
>Hey All,
> I just enlarged the outboard holes in my center section for conduit
>to 5/8", as instructed, and find that the holes now interfere with
>(are overlapped by) the two side sections that are riveted to the area.
>
> On the plans (which also instruct you to enlarge the holes to 5/8"),
>the holes are depicted at 3/8", and do not interfere with the side
>posts at that size.
>
> Anyone else have this problem?
>
> Though this one is certainly not the end of the world, I am growing
>increasingly frustrated by errors in the plans and manual. Should I
>be triple-checking every single instruction and measurement, comparing
>the plans, manual, and reality, for any possible conflict?
>
>Paul
>http://hmb.dyndns.org/~eastham/rv
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|