---------------------------------------------------------- RV9-List Digest Archive --- Total Messages Posted Sat 05/01/04: 2 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 07:28 AM - Panel Removal (Leland) 2. 08:44 AM - Re: Panel Removal (Tod Watkins) ________________________________ Message 1 _____________________________________ Time: 07:28:28 AM PST US From: Leland Subject: RV9-List: Panel Removal --> RV9-List message posted by: Leland Is it possible to remove the instrument panel on a completed RV9 slider, or at least unscrew the fasteners it and tip the top of it back to gain access to the back of the instruments and wiring? Leland in Pleasanton Just ordered the Dynon D-10A ________________________________ Message 2 _____________________________________ Time: 08:44:44 AM PST US From: "Tod Watkins" Subject: Re: RV9-List: Panel Removal --> RV9-List message posted by: "Tod Watkins" Oh and in response to your original question I think the answer is NO once the original panel is installed it cannot be tipped out from the top to gain access to the back.. someone may have a trick that I don't know of but from what I saw of our original panel installation the way it fits into the fuselage in that area tipping it would be very difficult if not impossible and may result in a one tip per panel outcome... if you know what I mean... we decided that the Affordable Panel was the way to go for that reason... as easy access to the back of the panel was a high priority to us.. Tod ----- Original Message ----- From: "Leland" Subject: RV9-List: Panel Removal > --> RV9-List message posted by: Leland > > Is it possible to remove the instrument panel on a completed RV9 slider, > or at least unscrew the fasteners it and tip the top of it back to gain > access to the back of the instruments and wiring? > Leland in Pleasanton > Just ordered the Dynon D-10A > >