----------------------------------------------------------
                           RV9-List Digest Archive
                                      ---
                     Total Messages Posted Thu 07/08/04: 3
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 09:12 AM - Best bucking bar  (D & E Munz)
     2. 12:51 PM - Re: Best bucking bar  (Michael Schipper)
     3. 07:45 PM - Re: Best bucking bar  (DThomas773@aol.com)
 
 
 
________________________________  Message 1  _____________________________________


Time: 09:12:10 AM PST US
From: "D & E Munz" <182ppl@comcast.net>
Subject: RV9-List: Best bucking bar
        Rule breakdown below        pts        rule name                      
description

--> RV9-List message posted by: "D & E Munz" <182ppl@comcast.net>

Can anyone recommend a bucking bar to buck the rivets that attach the innermost
main rib on the HS to the inner mostnose rib? Its a very tight space between
the attach angle piece and the ribs.






________________________________  Message 2  _____________________________________


Time: 12:51:52 PM PST US
From: Michael Schipper <mike@learningplanet.com>
Subject: Re: RV9-List: Best bucking bar

--> RV9-List message posted by: Michael Schipper <mike@learningplanet.com>

I found one at a swapmeet that looks like a railroad spike. It is about  
1" square and 8" long and tapered at one end. I was able to get into  
the tight spaces with it with only a few skinned knuckles! :-)

Mike Schipper
www.my9a.com


On Jul 8, 2004, at 11:11 AM, D & E Munz wrote:

> --> RV9-List message posted by: "D & E Munz" <182ppl@comcast.net>
>
> Can anyone recommend a bucking bar to buck the rivets that attach the  
> innermost main rib on the HS to the inner mostnose rib? Its a very  
> tight space between the attach angle piece and the ribs.
>
>
> _- 
> ======================================================================= 
> _- 
> ======================================================================= 
> _- 
> ======================================================================= 
> _- 
> ======================================================================= 
> >
>
>






________________________________  Message 3  _____________________________________


Time: 07:45:56 PM PST US
From: DThomas773@aol.com
Subject: Re: RV9-List: Best bucking bar

--> RV9-List message posted by: DThomas773@aol.com

I went to the local hardware store.  They had square, weldable steel, in 
1/8",1/4" and 1/2" bars.  I bought some 1/4 and 1/2, cut it up into working size

pieces and found they were very usefull in many places.

Dennis Thomas