----------------------------------------------------------
                           RV9-List Digest Archive
                                      ---
                     Total Messages Posted Mon 07/12/04: 3
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 09:53 AM - Re: Am I the only one who...  (Phil Birkelbach)
     2. 10:59 AM - Re: Am I the only one who...  (Gerry Filby)
     3. 03:03 PM - Re: Am I the only one who...  (DThomas773@aol.com)
 
 
 
________________________________  Message 1  _____________________________________


Time: 09:53:11 AM PST US
From: "Phil Birkelbach" <phil@petrasoft.net>
Subject: Re: RV9-List: Am I the only one who...

--> RV9-List message posted by: "Phil Birkelbach" <phil@petrasoft.net>

Don't have one, and don't want one.  Only one more skin to go.

Godspeed,

Phil Birkelbach


----- Original Message ----- 
From: "Bill Repucci" <bill@repucci.com>
Subject: RV9-List: Am I the only one who...


> --> RV9-List message posted by: "Bill Repucci" <bill@repucci.com>
>
> is building an RV without a pneumatic rivet squeezer?  Just curious as
> I'm about to start riveting up my flaps by hand.
>
> Do you think it is possible for Van's to design in more rivets than he
> did?  I'm starting to think that 1/2 the RV empty weight is rivets.
>
> Ok, enough complaining, time to get back in the basement.
>
> Bill R.
> RV-9
> SN: 90737
>
>






________________________________  Message 2  _____________________________________


Time: 10:59:41 AM PST US
Subject: Re: RV9-List: Am I the only one who...
From: Gerry Filby <gerf@gerf.com>

--> RV9-List message posted by: Gerry Filby <gerf@gerf.com>


I splashed out and I'm glad I did.  However, you can mess up 
with a pneumatic squeezer just as easily as you can with a hand 
one or the rivet gun - and you can mess up a lot more quickly.  
The consistency of the results is very satisfying though.

g

> 
> --> RV9-List message posted by: "Phil Birkelbach" <phil@petrasoft.net>
> 
> Don't have one, and don't want one.  Only one more skin to go.
> 
> Godspeed,
> 
> Phil Birkelbach
> 
> 
> ----- Original Message ----- 
> From: "Bill Repucci" <bill@repucci.com>
> To: <rv9-list@matronics.com>
> Subject: RV9-List: Am I the only one who...
> 
> 
> > --> RV9-List message posted by: "Bill Repucci" <bill@repucci.com>
> >
> > is building an RV without a pneumatic rivet squeezer?  Just curious as
> > I'm about to start riveting up my flaps by hand.
> >
> > Do you think it is possible for Van's to design in more rivets than he
> > did?  I'm starting to think that 1/2 the RV empty weight is rivets.
> >
> > Ok, enough complaining, time to get back in the basement.
> >
> > Bill R.
> > RV-9
> > SN: 90737
> >
> >
> 
> 
> 
> 
> 
> 
> 

-- 
========================================================== 
Gerry Filby                                  gerf@gerf.com
                    Home: 415 239 4846
                    Cell: 415 203 9177






________________________________  Message 3  _____________________________________


Time: 03:03:23 PM PST US
From: DThomas773@aol.com
Subject: Re: RV9-List: Am I the only one who...

--> RV9-List message posted by: DThomas773@aol.com

Bill,
I have an old, much used one I would sell cheap.

Dennis Thomas
Done building