---------------------------------------------------------- RV9-List Digest Archive --- Total Messages Posted Thu 07/15/04: 2 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 12:04 PM - Painting the wheel spats (Steve Sampson) 2. 09:53 PM - Want to buy Klixon Circuit Breakers (Albert Gardner) ________________________________ Message 1 _____________________________________ Time: 12:04:27 PM PST US From: "Steve Sampson" Subject: RV9-List: Painting the wheel spats --> RV9-List message posted by: "Steve Sampson" I squirted some high build primer on the wheel spats/pants and it behaved completely differently from the cowls. Prior to painting I had rubbed down lightly to provide a key and cleaned with panel wipe (I think this is MEK in American). This worked well for the cowls and has shown up all the remaining pinholes. On the spats however it has reacted oddly. Are they a polyester resin rather than epoxy? Could it be they have a different release agent that is still there? If so how do you get this off? The good news it sanded off again in no time, but I am no further along! Advice on how to deal with them would be very welcome! Steve. #90360 --- ________________________________ Message 2 _____________________________________ Time: 09:53:03 PM PST US From: "Albert Gardner" Subject: RV9-List: Want to buy Klixon Circuit Breakers --> RV9-List message posted by: "Albert Gardner" If anyone has some Klixon 7277-2 CB's for sale, I'm looking for several. Contact off list for a list of what I need. Albert Gardner RV-9A 872RV Yuma, AZ