----------------------------------------------------------
                           RV9-List Digest Archive
                                      ---
                     Total Messages Posted Sat 07/24/04: 1
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 10:48 AM - Altenator fit  (Steve Sampson)
 
 
 
________________________________  Message 1  _____________________________________


Time: 10:48:27 AM PST US
From: "Steve Sampson" <SSampson.SLN21@london.edu>
Subject: RV9-List: Altenator fit

--> RV9-List message posted by: "Steve Sampson" <SSampson.SLN21@london.edu>

I tried fitting the reccomended Gates 7350 belt to the starter
ring/altenator today (Standatd setup). The bump on the altenator (I think it
houses the electronics) looses me about 1/3rd of the movement and since I do
not want to rotate the engine (its inhibited) I could not get it on. In view
of the loss of travel I worry the belt would be too tight anyway. Is this
problem familiar to anyone else. Those of you flying. What was your
resolution?

Thanks, Steve.

#90360
UK

---