---------------------------------------------------------- RV9-List Digest Archive --- Total Messages Posted Mon 08/23/04: 5 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 11:37 AM - Fuel valve (Steve Sampson) 2. 11:48 AM - Re: Fuel valve (Ross S) 3. 12:15 PM - Re: Fuel valve (Konrad Werner) 4. 02:28 PM - Rudder wiring question (Bob Smith) 5. 02:50 PM - Re: Fuel valve (cgalley) ________________________________ Message 1 _____________________________________ Time: 11:37:22 AM PST US From: "Steve Sampson" Subject: RV9-List: Fuel valve --> RV9-List message posted by: "Steve Sampson" Could someone remind me about the positions on the VANS supplied valve. One position is L Tank, one R Tank. Am I correct in thinking the other two are both 'OFF' or is one 'Both'? I am just getting some labelling made up and cant get to the valve. Thanks, Steve. #90360 UK --- ________________________________ Message 2 _____________________________________ Time: 11:48:45 AM PST US From: "Ross S" Subject: RE: RV9-List: Fuel valve --> RV9-List message posted by: "Ross S" Steve, The valve that came with my RV-7 kit has Left, Right, Off, and Off. Best, Ross Ross Schlotthauer RV-7 finishing www.experimentalair.com >From: "Steve Sampson" >Reply-To: rv9-list@matronics.com >To: >Subject: RV9-List: Fuel valve >Date: Mon, 23 Aug 2004 19:39:27 +0100 > >--> RV9-List message posted by: "Steve Sampson" > >Could someone remind me about the positions on the VANS supplied valve. >One position is L Tank, one R Tank. Am I correct in thinking the other two >are both 'OFF' or is one 'Both'? I am just getting some labelling made up >and cant get to the valve. > >Thanks, Steve. > >#90360 >UK > >--- > > Get ready for school! Find articles, homework help and more in the Back to ________________________________ Message 3 _____________________________________ Time: 12:15:50 PM PST US From: "Konrad Werner" Subject: Re: RV9-List: Fuel valve --> RV9-List message posted by: "Konrad Werner" Dear Steve, The current valve has 3 Fuel Ports plus OFF. One of the fuel ports (your choice) is not used with the standard 2-Tank setup. There is no "Both" on this valve. do not archive ----- Original Message ----- From: Steve Sampson To: rv9-list@matronics.com Sent: Monday, August 23, 2004 12:39 PM Subject: RV9-List: Fuel valve --> RV9-List message posted by: "Steve Sampson" Could someone remind me about the positions on the VANS supplied valve. One position is L Tank, one R Tank. Am I correct in thinking the other two are both 'OFF' or is one 'Both'? I am just getting some labelling made up and cant get to the valve. Thanks, Steve. #90360 UK --- ________________________________ Message 4 _____________________________________ Time: 02:28:25 PM PST US From: "Bob Smith" Subject: RV9-List: Rudder wiring question --> RV9-List message posted by: "Bob Smith" For those of you who elected to put a marker light/strobe on the rudder (mounted in the lower fiberglass faring), how did you run the wire? Seems that getting the wire out of the fuselage and into the rudder, including the necessary flexing, is a bit of a problem. I want to avoid having it chafe or break from flexing. Thanks, Bob Smith ________________________________ Message 5 _____________________________________ Time: 02:50:33 PM PST US From: "cgalley" Subject: Re: RV9-List: Fuel valve --> RV9-List message posted by: "cgalley" With a low winged plane you DON'T want a both. Causes fuel starvation problems. Cy Galley Safety Programs Editor Always looking for ideas and articles for EAA Sport Pilot ----- Original Message ----- From: "Konrad Werner" Subject: Re: RV9-List: Fuel valve > --> RV9-List message posted by: "Konrad Werner" > > Dear Steve, > The current valve has 3 Fuel Ports plus OFF. One of the fuel ports (your choice) is not used with the standard 2-Tank setup. > There is no "Both" on this valve. > do not archive > ----- Original Message ----- > From: Steve Sampson > To: rv9-list@matronics.com > Sent: Monday, August 23, 2004 12:39 PM > Subject: RV9-List: Fuel valve > > > --> RV9-List message posted by: "Steve Sampson" > > Could someone remind me about the positions on the VANS supplied valve. > One position is L Tank, one R Tank. Am I correct in thinking the other two > are both 'OFF' or is one 'Both'? I am just getting some labelling made up > and cant get to the valve. > > Thanks, Steve. > > #90360 > UK > > --- > >