---------------------------------------------------------- RV9-List Digest Archive --- Total Messages Posted Wed 12/08/04: 2 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 09:48 AM - Re: Trim Cable (Matthew Brandes) 2. 09:50 AM - Re: EZ Pilot servo wing installation (Matthew Brandes) ________________________________ Message 1 _____________________________________ Time: 09:48:21 AM PST US From: "Matthew Brandes" Subject: RV9-List: RE: Trim Cable --> RV9-List message posted by: "Matthew Brandes" I've seen a picture somewhere on some RV builders website that had a trim system in it. I can't remember where I saw it but if I do, I'll post it. In the meantime, you might be able to get this mechanism to work for you. http://www.aircraftspruce.com/catalog/elpages/ranstrimsys.php Matthew Brandes, Van's RV-9A (Finish Kit) EAA Chapter 868/91/1329 www.n523rv.com ________________________________ Message 2 _____________________________________ Time: 09:50:54 AM PST US From: "Matthew Brandes" Subject: RV9-List: RE: EZ Pilot servo wing installation --> RV9-List message posted by: "Matthew Brandes" Roger, I would email Trio Avionics and ask them. I asked them about mounting it in the wing itself near the bellcrank and they sent me some pictures of the installation in an RV-7. I'm sure they'll tell you what sort of hardware you need for mounting it in the wing-tip, since this is a common location. Matthew Brandes, Van's RV-9A (Finish Kit) EAA Chapter 868/91/1329 www.n523rv.com