----------------------------------------------------------
                           RV9-List Digest Archive
                                      ---
                     Total Messages Posted Mon 12/27/04: 1
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 12:07 PM - Re: Re: Re: Re:Dynon pitot  (Steve Sampson)
 
 
 
________________________________  Message 1  _____________________________________


Time: 12:07:33 PM PST US
From: "Steve Sampson" <SSampson.SLN21@london.edu>
Subject: RE: RV9-List: Re: Re: Re:Dynon pitot

--> RV9-List message posted by: "Steve Sampson" <SSampson.SLN21@london.edu>

Leland - I tend to degrease washers with MEK and then attach a 'wing' of
masking tape on one side to hold them by as I push the bolt through. When
the bolt is through I yank hard on the tape. It works most of the time for
me. Steve.

PS Then introduce some oil/grease to make up forwaht was removed.

-----Original Message-----
From: owner-rv9-list-server@matronics.com
[mailto:owner-rv9-list-server@matronics.com]On Behalf Of Leland
Subject: RV9-List: Re: Re: Re:Dynon pitot
....................

Leland
Installing the empennage and elevator control tubes (getting the washers
in is a bitch)

>

--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.