---------------------------------------------------------- RV9-List Digest Archive --- Total Messages Posted Thu 01/06/05: 3 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 02:25 PM - RV-8 Fastback (Clark, Thomas M UTPWR) 2. 02:45 PM - Re: Plans callout (Roger Ping) 3. 08:03 PM - Re: Plans callout (robert watson) ________________________________ Message 1 _____________________________________ Time: 02:25:25 PM PST US From: "Clark, Thomas M UTPWR" rv8-list@matronics.com, rv9-list@matronics.com, rv-list@matronics.com, Mid-AtlRVwing@yahoogroups.com, rv8list@yahoogroups.com, BostonRVBuilders@yahoogroups.com Subject: RV9-List: RV-8 Fastback --> RV9-List message posted by: "Clark, Thomas M UTPWR" Groups, I have had a bunch of questions about my modified RV-8 Fastback which was completed mid. last year. I now have a web site that should answer many of the questions about this modification. Try the link below. Thanks, Tom RV8 Fastback, N525TC, 75 hours http://members.cox.net/rv8fastback Tom Clark 860-727-2287 Office 860-604-5826 Cell 860-998-9811 Fax e-mail: tom.clark@utcfuelcells.com ________________________________ Message 2 _____________________________________ Time: 02:45:04 PM PST US From: "Roger Ping" Subject: RE: RV9-List: Plans callout --> RV9-List message posted by: "Roger Ping" DWG 27A shows both. -----Original Message----- From: owner-rv9-list-server@matronics.com [mailto:owner-rv9-list-server@matronics.com] On Behalf Of Leland Subject: RV9-List: Plans callout --> RV9-List message posted by: Leland The plans do not have callouts for the Adel Clamps used to fix the rudder cable tubings to the fuselage at their exit point nor are there callouts for hardware used to attach the cables to the rudder horn. I wonder what other builders have done. Leland ________________________________ Message 3 _____________________________________ Time: 08:03:32 PM PST US From: robert watson Subject: Re: RV9-List: Plans callout --> RV9-List message posted by: robert watson do not use nylocs . use castle nut and cotter pin. you can adjust to leave no binding on cables.and won't fall off. Bob Watson N194BN + 280 Hr,s -----Original Message----- From: Leland Subject: RV9-List: Plans callout --> RV9-List message posted by: Leland The plans do not have callouts for the Adel Clamps used to fix the rudder cable tubings to the fuselage at their exit point nor are there callouts for hardware used to attach the cables to the rudder horn. I wonder what other builders have done. Leland