Today's Message Index:
----------------------
1. 08:48 AM - Re: Adel Clamp hardware (Leland)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Adel Clamp hardware |
--> RV9-List message posted by: Leland <Federigo@pacbell.net>
Mark, thank you for the help. I see the callouts now. A builder in Minnesota notes
that you can go to Walter Tondu's RV7 site and pull up a full set of drawings
in pdf format by typing "plans" in the search window. Kinda neat.
Leland in Pleasanton, California
>
>Time: 09:34:23 AM PST US
>From: Mark Schrimmer <mschrimmer@pacbell.net>
>Subject: RV9-List: Adel Clamp hardware
>
>--> RV9-List message posted by: Mark Schrimmer <mschrimmer@pacbell.net>
>
>Leland,
>
>I have an early kit and the Adel clamp for the platic
>tube is on Drawing 27 for the RV-9A. I think newer
>kits might have the info on Drawing 27A. My Drawing
>27, last revised on 3/14/01 says:
>
>AN509-8R8 Screw
>AN365-832 Nut
>AN960-8 Washer
>MS21919DG6 Clamp
>See Drawing 28 for location
>
>Hope this helps,
>
>Mark
>
>
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|