---------------------------------------------------------- RV9-List Digest Archive --- Total Messages Posted Tue 01/25/05: 2 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 07:35 AM - Re: gretz pitot bracket (Mark Schrimmer) 2. 09:09 AM - Re: Re: gretz pitot bracket (kerrjohna@comcast.net) ________________________________ Message 1 _____________________________________ Time: 07:35:07 AM PST US From: Mark Schrimmer Subject: RV9-List: Re: gretz pitot bracket --> RV9-List message posted by: Mark Schrimmer Mark, thanks for the reply, but you might have noticed my posts indicating that top and bottoms skins are already in place. Any suggestions? John John, Have you considered using flush-head pop rivets or Cherry-Max rivets? Mark ________________________________ Message 2 _____________________________________ Time: 09:09:30 AM PST US From: kerrjohna@comcast.net Subject: Re: RV9-List: Re: gretz pitot bracket --> RV9-List message posted by: kerrjohna@comcast.net Thanks to all who chimed in on mounting the Gretz bracket for Dynon after both wing skins have been riveted. It did not take as long to accomplish as the time spent worrying about it. I was able to place in on the next outboard bay from the bell crank. I can give a detailed step-by-step explanation if anyone is interested. I feel a little like the proctologist that sat for his A&P license....(If you have heard the joke contact me offline). John Kerr -------------- Original message -------------- > --> RV9-List message posted by: Mark Schrimmer > > Mark, thanks for the reply, but you might have noticed > my posts indicating that top and bottoms skins are > already in place. Any suggestions? > John > > John, > > Have you considered using flush-head pop rivets or > Cherry-Max rivets? > > Mark > > > > > > Thanks to all who chimed in on mounting the Gretz bracket for Dynon after both wing skins have been riveted. It did not take as long to accomplish as the time spent worrying about it. I was able to place in on the next outboard bay from the bell crank. I can give a detailed step-by-step explanation if anyone is interested. I feel a little like the proctologist that sat for his AP license....(If you have heard the joke contact me offline). John Kerr -------------- Original message -------------- -- RV9-List message posted by: Mark Schrimmer Mark, thanks for the reply, but you might have noticed my posts indicating that top and bottoms skins are already in place. Any suggestions? John John, Have you considered using flush-head pop rivets or Cherry-Max rivets? Mark