Today's Message Index:
----------------------
1. 04:12 PM - Edge connectors? (Tom & Carol Strong)
2. 05:35 PM - Re: Edge connectors? (rv-9a-online)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Edge connectors? |
--> RV9-List message posted by: Tom & Carol Strong <tstrong@ida.net>
I purchased a used transponder and radio from Bennett Avionics and they
came with the edge connector
wires cut with only 1/4" remaining. I'd like to replace the pins in the
connector with new ones. Does anyone know where
I can get these pins?
Thanks, Tom RV9A Canopy almost done
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Edge connectors? |
--> RV9-List message posted by: rv-9a-online <rv-9a-online@telus.net>
Tom:
You'd need to identify the connector, or at least the brand of radio and
transponder. One way to do this is to look for a brand on the connector
itself, and even a part number. If all else fails, measure the pitch of
the connector pins and the spacing of the rows. Many of the old edge
connectors have 0.156" pitch.
Then, go to digikey.com or mouser.com and search for compatible pins.
Oh, and you could call Bennett Avionics, they may stock them-- a real
avionics company should.
Vern Little RV-9A http://www3.telus.net/aviation/flying/RV-9A/rv-9a.html
Tom & Carol Strong wrote:
>--> RV9-List message posted by: Tom & Carol Strong <tstrong@ida.net>
>
>I purchased a used transponder and radio from Bennett Avionics and they
>came with the edge connector
>wires cut with only 1/4" remaining. I'd like to replace the pins in the
>connector with new ones. Does anyone know where
>I can get these pins?
>
>Thanks, Tom RV9A Canopy almost done
>
>
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|