----------------------------------------------------------
                           RV9-List Digest Archive
                                      ---
                     Total Messages Posted Wed 02/09/05: 3
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 12:47 PM - Re: pitot/static fuselage installation  (Surgsail@aol.com)
     2. 03:06 PM - Re: pitot/static fuselage installation  (Edcarris@aol.com)
     3. 03:06 PM - pitot/static fuselage installation  (jc@INFONET.COM.BR)
 
 
 
________________________________  Message 1  _____________________________________


Time: 12:47:50 PM PST US
From: Surgsail@aol.com
Subject: Re: RV9-List: pitot/static fuselage installation

--> RV9-List message posted by: Surgsail@aol.com

Hello there,

Just finished installing the static system in my RV9-A last week.   There is 
a drawing which comes with the parts for the static system.  The  "rivets" are

the openings in the fuse for the system.  The madrels are  removed and the 
tubing hooked to the rivets.  The location of the holes in  the fuse skin is on

the drawing with all the rivet call outs for the skin.  

I can scan and send you a set of the instructions if you can't find  yours.  

Good luck,

Richard Neeley






________________________________  Message 2  _____________________________________


Time: 03:06:46 PM PST US
From: Edcarris@aol.com
Subject: Re: RV9-List: pitot/static fuselage installation

--> RV9-List message posted by: Edcarris@aol.com

Look at drawing 28, detail E






________________________________  Message 3  _____________________________________


Time: 03:06:46 PM PST US
From: jc@INFONET.COM.BR
Subject: RV9-List: pitot/static fuselage installation

--> RV9-List message posted by: jc@infonet.com.br

Hi Richard Neeley
Im just at this point too. And, I dont have the static system dwg. Ill really 
appreciate if you could send me some drawings and photos.
JC - Aracaju - Brasil
-9A QB
#90997
fuse